Brother DCP-7065DN Basic User's Manual page 82

Examples of poor print quality
F G H
A B C D E
h i j k
a b c d e f g
A B C D
a b c d e
0 1 2 3 4
Page skewed
Curled or wavy
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
Wrinkles or creases
68
Recommendation
 Make sure that the paper or other print media is loaded properly
in the paper tray and that the guides are not too tight or too loose
against the paper stack.
 Set the paper guides correctly. See Loading paper on page 8.
 If you are using the manual feed slot, see Loading paper in the
manual feed slot on page 10.
 The paper tray may be too full. See Loading paper on page 8.
 Check the paper type and quality. See Acceptable paper and
other print media on page 16.
 Check for loose objects such as torn paper inside the machine.
 Verify that the two green envelope levers inside the back cover
are set to the same position.
 Verify that the two gray Anti-Curl Levers inside the back cover are
set to the same position.
 If the problem only occurs during duplex printing, check for torn
paper in the duplex tray, verify that the duplex tray is inserted
completely, and verify that the back cover is closed completely.
 Check the paper type and quality. High temperatures and high
humidity will cause paper to curl. See Acceptable paper and other
print media on page 16.
 If you do not use the machine often, the paper may have been in
the paper tray too long. Turn over the stack of paper in the paper
tray. Also, fan the paper stack and then rotate the paper 180 in
the paper tray.
 Open the back cover (face-up output tray) for the machine to eject
printed pages onto the face-up output tray.
 Choose Reduce Paper Curl mode in the printer driver when you
do not use our recommended paper. See Other Print Options (for
®
Windows ) or Print Settings (For Macintosh) in the Software
User's Guide.
 Make sure that the paper is loaded properly. See Loading paper
on page 8.
Check the paper type and quality. See Acceptable paper and

other print media on page 16.
 Turn over the stack of paper in the tray or try rotating the paper
180 in the input tray.