ST1K - Table of contents Table of contents Introduction ........................3 Main features ......................3 Parts of the ST1K ....................3 Preparation ........................4 Installing the batteries .................... 4 Making connections ....................4 Tuning ..........................5 How to tune ....................... 5 Adjusting the calibration ..................5 Setting the display mode..................
ST1K - Introduction Introduction Thank you for purchasing the Korg ST1K Synthesizer Tuner. Main features • A standard adapter plug for a 3.5 mm mini jack (like the patch cables that are widely used with modular synthesizers) to 6.3 mm (1/4”) jack is included with this unit.
Connecting to a synthesizer When using this tuner with a modular synthesizer, connect the oscillator output to the ST1K to tune the oscillator pitch. Connect the OUTPUT jack of the ST1K to the filter or other component of the modular synthesizer.
Adjusting the calibration The ST1K comes from the factory with the calibration set to A=440 Hz. If an adjustment is necessary, you can do so within a range of 436–445 Hz.
The calibration setting will be remembered even if the power is turned off. However, this setting will be reset to the factory default if the batteries are removed. Setting the display mode The ST1K allows you to choose one of three display mode settings. The factory setting is Regular mode. Press the DISPLAY button.
Need help?
Do you have a question about the ST1K and is the answer not in the manual?
Questions and answers