Time-Out Settings - WattBox WB-820-IPVM-12 Installation Manual

Time-Out Settings

Configure the amount of time and the events that trigger an auto-reboot. Options
include:
Time-out Interval is the amount of time (between 1 and 60 seconds) the device
l
waits before it considers a host to time out. For example, if the Time-out Interval is
set to 30 seconds the host(s) must be unreachable for 30 seconds before it is
considered a time-out.
Number of Time-outs before Auto-Reboot is the number of consecutive time-
l
outs (between 1 and 10) that must occur before an outlet reboots.
Connection Test Delay Interval After Auto-Reboot is the amount of time the
l
WattBox waits between time-out tests.
Pro Tip: -_
Make sure there is enough time for the networking equipment to
power on and start their services before the WattBox tries to
connect to the configured Hosts.
23