WattBox WB-820-IPVM-12 Installation Manual page 19

Load shedding configuration
Use the dropdown next to each outlet to determine at what battery percentage the UPS
turns the outlet off.
Load shedding does not work for outlets configured to Reset Only .
Note: -__.
Safe Voltage
Safe Voltage disables all the outlets when the input voltage falls outside of a safe range.
Toggle this feature on or off.
This feature is only compatible with the WB-800CH1U-IPVM-8 and 820 series
Note: -__.
WattBoxes in North America. All 800I devices are compatible.
LED Brightness (chassis and faceplate devices
only)
If the WattBox is a chassis model or has a connected faceplate Use the slider to set the
brightness of the faceplate's LEDs
19