WattBox WB-820-IPVM-12 Installation Manual page 14

Connections
1. If attaching a WattBox UPS battery pack to the power conditioner, connect an
Ethernet cable between the UPS Link ports on the power conditioner and the UPS.
Caution: -.
2. For IP control and OvrC connectivity, connect a network cable from your router or
switch into the WB-820 Network port. To learn more about OvrC, visit the
Community
3. Connect the IEC power cord to the power conditioner and to the WattBox UPS (if
applicable) or a grounded outlet.
14
The UPS link must be connected before applying power to the PDU. For
OvrC connectivity, plug a network cable from your router or switch into
the network port.
and read the OvrC User Guide.
Tech