About The Audio Output Settings - Pioneer BDP 320 - Blu-Ray Disc Player Operating Instructions Manual

About the audio output settings

The audio signals that are output differ according to the audio format recorded on the disc and the player's settings.
Check on the table below.
Caution
• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT terminal
or DIGITAL OUT terminal (pages 19 and 46).
• When HDMI or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output
from all terminals other than the ones selected at Output Terminal (pages 19 and 46).
• The output from all terminals other than the ones selected for Audio does not sound as intended by the content
provider.
Audio format
BD- Dolby Digital
ROM
Dolby Digital
Plus
Dolby TrueHD
DTS Digital
Converted to 2-
Surround
channel audio
DTS-HD High
Resolution
Audio
DTS-HD Master
Audio
Linear PCM
BD-R/ Dolby Digital
Converted to 2-
-RE
channel audio
MPEG-2 AAC
MPEG
Linear PCM
DVD- Dolby Digital
Converted to 2-
Video
DTS Digital
channel audio
Surround
MPEG
Linear PCM
DVD-R/ Dolby Digital Converted to 2-
-RW channel audio
(VR
MPEG
format)
Linear PCM
1. When Audio Output Mode is set to 2 Channel or Multi-channel (page 38).
2. When Dolby Digital Out is set to Dolby Digital  PCM, DTS Out is set to DTS  PCM, or AAC Out is set to AAC  PCM (page 38).
3. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 38).
4. When HDMI Audio Out is set to PCM or Auto (page 39).
5. When outputting Dolby Digital or DTS Digital Surround bitstream with Dolby Digital Out set to Dolby Digital 2 and DTS Out set to DTS
2, the secondary audio and interactive audio signals are not mixed for output.
6. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio
or DTS Digital Surround, the secondary audio and interactive audio signals are not mixed for output.
7. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in linear PCM (7.1
channels) or Dolby Digital bitstream.
If the connected HDMI device is not compatible with Dolby Digital bitstream, the signals are output in linear PCM (2 channels).
8. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels), depending on HDMI High
Speed Transmission setting and/or the connected HDMI device (page 14).
AUDIO OUT terminals
1 1
2ch Multi-channel
5.1-channel
audio
7.1-channel
audio
7.1-channel
audio
7.1-channel
audio
5.1-channel
audio
5.1-channel
audio
5.1-channel
audio
DIGITAL OUT terminal
Converted to Not converted
linear PCM to linear PCM
2 3
audio audio
Dolby Digital
Converted to 2-
channel audio
DTS Digital
5
Surround
Converted to 2-
channel audio
Dolby Digital
Converted to 2-
channel audio
MPEG-2 AAC
2-channel audio
Dolby Digital
Converted to 2-
DTS Digital
channel audio
Surround
2-channel audio
Converted to 2-
Dolby Digital
channel audio
2-channel audio
HDMI OUT terminal
4
PCM Auto
5.1-channel
Dolby Digital
audio
Dolby Digital
7.1-channel
5
audio
Plus
7.1-channel Dolby
8
audio TrueHD
DTS Digital
7.1-channel
audio
Surround
DTS-HD High
Resolution
7.1-channel
6,8,10
Audio
8
audio
DTS-HD Master
6,10,11
Audio
8
7.1-channel audio
Dolby Digital
5.1-channel
audio
MPEG-2 AAC
Dolby Digital
5.1-channel
DTS Digital
audio
Surround
5.1-channel
Dolby Digital
audio
06
4
6,7
6,7
6,7,9
6,10
7
7
10
7
47
En