About The Audio Output Settings - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Owner's manual

Hide thumbs Also See for BDP-09FD - Elite Blu-Ray Disc Player:

Service manual (162 pages)

Brochure & specs (16 pages)

User manual (15 pages)

Table of Contents

About the audio output settings

The audio signals that are output differ according to the audio format recorded on the disc and the player's settings. Check on the table

below.

Caution

• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT or DIGITAL OUT terminals

(page 44).

• When HDMI MAIN or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output from all

terminals other than the ones selected at Output Terminal (page 44).

• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel audio signals.

Audio format

BD-ROM Dolby Digital

Dolby Digital Plus

Dolby TrueHD

DTS Digital

Surround

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

Linear PCM

BD-R/

Dolby Digital

-RE

MPEG-2 AAC

MPEG

Linear PCM

DVD-

Dolby Digital

Video

DTS Digital

Surround

MPEG

Linear PCM

DVD (VR

Dolby Digital

format)

MPEG

Linear PCM

1. When Audio Output Mode is set to 2 Channel or Multi-channel (page 45).

2. When Dolby Digital Out is set to Dolby Digital  PCM, DTS Out is set to DTS  PCM, or AAC Out is set to AAC  PCM (page 44).

3. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 44).

4. When HDMI Audio Out is set to PCM or Auto (page 45).

5. When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and

interactive audio signals are not mixed for output.

6. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the

secondary audio and interactive audio signals are not mixed.

7. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in linear PCM (7.1 channels) or Dolby Digital

bitstream.

If the connected HDMI device is not compatible with Dolby Digital bitstream, the signals are output in linear PCM (2 channels).

8. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels), depending on HDMI High Speed Transmission setting

and/or the connected HDMI device (page 15).

9. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream, depending on HDMI High

Speed Transmission setting and/or the connected HDMI device (page 15).

10. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround

bitstream.

If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).

11. DTS Digital Surround signals converted to linear PCM audio signals are output.

12. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or DTS Digital Surround bitstream, depending on HDMI

High Speed Transmission setting and/or the connected HDMI device (page 15).

AUDIO OUT (7.1 ch) terminals

2ch

Multi-channel

5.1-channel audio

7.1-channel audio

5.1-channel audio

Converted to 2-

channel audio

5.1-channel audio

7.1-channel audio

Converted to 2-