About The Audio Output Settings - Pioneer Elite BDP-05FD Operating Instructions Manual

Pioneer blu-ray player user manual

Hide thumbs Also See for Elite BDP-05FD:

Service manual (127 pages)

Specifications (2 pages)

Operating instructions manual (72 pages)

Table of Contents

About the audio output settings

The audio signals that are output differ according to the audio format recorded on the disc and the player's settings. Check on the table

below.

Audio format

BD-ROM Dolby Digital

Dolby Digital Plus

Dolby TrueHD

DTS Digital

Surround

DTS-HD High

Resolution Audio

DTS-HD Master

Audio

Linear PCM

BD-R/RE Dolby Digital

MPEG-2 AAC

MPEG

Linear PCM

DVD-

Dolby Digital

Video

DTS Digital

Surround

MPEG

Linear PCM

DVD (VR

Dolby Digital

format)

MPEG

Linear PCM

1. When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals are output with the number of

channels for which the device is compatible.

2. When Audio Output Mode is set to 2 Channel or Multi-channel (page 40).

3. When Dolby Digital Out is set to Dolby Digital  PCM, DTS Out is set to DTS  PCM, or AAC Out is set to AAC  PCM (page 40).

4. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 40).

5. When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and

interactive audio signals are not mixed for output.

6. When HDMI Audio Out is set to PCM or Auto (page 41).

7. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the

secondary audio and interactive audio signals are not mixed.

8. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in Dolby Digital bitstream.

If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround

bitstream.

If the connected HDMI device is not compatible with Dolby Digital or DTS Digital Surround bitstream, the signals are output in linear PCM.

9. Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cases, output as audio signals of 5.1-channels or less.

10. When the output video resolution is set to 480i or 480p, the signals may be output in 2 channel, depending on HDMI High-Speed Transmission setting and/or the

connected HDMI device (page 15).

11. When the output video resolution is set to 480i or 480p, the signals may be output in Dolby Digital bitstream, depending on HDMI High-Speed Transmission setting

and/or the connected HDMI device (page 15).

12. DTS Digital Surround signals converted to linear PCM audio signals are output.

13. When the output video resolution is set to 480i or 480p, the signals may be output in DTS Digital Surround bitstream, depending on HDMI High-Speed Transmission

setting and/or the connected HDMI device (page 15).

Caution

• Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected at Audio under Output Terminal

Priority, regardless of the audio format or the player's settings (pages 20 and 48).

• The audio signals output from the DIGITAL OUT terminals have a sampling frequency of 48 kHz (44.1 kHz for CDs).

• MPEG audio is output in linear PCM.

AUDIO OUT terminal

2ch

Multi-channel

5.1-channel audio

7.1-channel audio

5.1-channel audio