Pioneer BDP 320 - Blu-Ray Disc Player Operating Instructions Manual page 23

• The output video resolution depends on the video
output terminal below.
Example:
Output Video Resolution
• The output video resolution setting can also be
switched by selecting Output Video Resolution
from the TOOLS menu.
 About Film material
The film material is a video signal with a frame rate of 24
frames/second. For example, these materials include
1080/24p, 720/24p, etc.
 About the output video resolution
The output video resolution setting and the resolution of the picture that is actually output differ for the different
terminals. See the table below.
Output video
resolution
HDMI OUT terminal
setting
3 Resolution preferred by
Auto
4,5,6
TV
480i 480/60i
480p 480/60p
1080i 1080/60i
3 9,10
1080p 1080/60p
Source Direct Resolution recorded on
5,11,12
disc
1. The video output terminal set at Video in the Setup Navigator (page 19) or the video output terminal selected with VIDEO SELECT (page 22).
2. Depending on the BD, the pictures may not be output.
3. This cannot be selected when the video output terminal is set to COMPONENT/VIDEO.
4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to HDMI OUT
terminal.
5. For details on the output of film material (1080/24p or 720/24p video signals), see To output film material above.
6. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i even if the TV's recommended resolution is 1080/60p.
7. DVD-Video or DVD-R/-RW (VR format) may be output at 480/60p.
8. BD-ROM or BD-R/-RE may be output at 480/60p.
9. Depending on the connected HDMI cable, the video signals may not be output.
10. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i.
11. Depending on the connected TV, the video signals may not be output.
12. 720/24p film material is output at 720/60p.
13. 1080/24p film material is output at 1080/60i.
Video resolution of the
currently playing disc
Source : 1080/60i
Auto
Current Output : 1080/60i
Output video resolution
from the player
1
HDMI
COMPONENT VIDEO/
VIDEO output
terminals
No video signals are
output
 To output film material
To output 1080/24p film material from HDMI OUT
terminal, set the output video resolution to either Auto or
Source Direct.
Caution
• 1080/24p signals can only be output from the HDMI
OUT terminal. They cannot be output from other
video terminals.
• When Auto is selected, the picture is output at 60
frames/second if your TV is not compatible with 1080/
24p signals.
• When Source Direct is selected, the signals are
output as such, even if your TV is not compatible with
1080/24p signals. If the picture is not displayed
properly, use OUTPUT RESOLUTION to set an output
video resolution at which the video and audio signals
are properly output.
• Even if Auto or Source Direct is selected, 720/24p
video signals are output at 60 frames/second.
COMPONENT/VIDEO
HDMI OUT terminal COMPONENT VIDEO
output terminals
No video signals are —
output
480/60i
480/60p
1080/60i
—
Resolution recorded on
8,11,12,13
disc
1
VIDEO output
2 2
terminal
—
480/60i
7,8
—
480/60i
03
23
En