Connecting A Tv; Connecting An Av Receiver Or Amplifier; Connecting Video And Audio Cables; Connecting A Tv Using A Video/Audio Cable - Pioneer BDP 320 - Blu-Ray Disc Player Operating Instructions Manual

02
Caution
• If the output video resolution is switched when
playing an audio CD (CD-DA), the PQLS function does
not work. This function will work again after playback
stops and restarts.
Note
• PQLS on the player's front panel display lights when
the PQLS function is activated (page 12).
 About connections to components
of other makes supporting the KURO
LINK function
The functions listed below work when a TV or AV system
(AV receiver or amplifier, etc.) supporting the player's
KURO LINK function is connected to the player using an
HDMI cable. (Depending on your TV or AV system (AV
receiver or amplifier, etc.), it could happen that not all of
the functions will work.)
• Functions operated from the TV
• Auto-select function
• Simultaneous power function
• Unified language function
Please see the Pioneer website for the latest information
on brands and model numbers of other brands that
support the KURO LINK function.

Connecting a TV

See Connecting an AV receiver or amplifier below to
connect an AV receiver or amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
DIGITAL DIGITAL
OUT OUT
OPTICAL OPTICAL
USB
LAN (100) LAN (100) (BD STORAGE) USB HDMI OUT HDMI OUT
To HDMI
input terminal It is also possible to connect to an
16
En
Player's rear panel
VIDEO VIDEO COMPONENT VIDEO COMPONENT VIDEO
CENTER CENTER SUB WOOFER SUB WOOFER
Y Y
OUT OUT
VIDEO VIDEO
L L P P B B
L L
R R P P
R R
R R
FRONT FRONT SURROUND SURROUND SURROUND SURROUND
CONTROL CONTROL
BACK BACK
AUDIO OUT(7.1 ch) AUDIO OUT(7.1 ch)
IN IN
Match the direction of
the plug to the terminal
and insert straight.
AV receiver or amplifier using an
HDMI cable (below).
Direction of signal flow
TV
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions of
AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Player's rear panel
VIDEO VIDEO
DIGITAL DIGITAL
OUT OUT
OPTICAL OPTICAL
USB CONTROL CONTROL
LAN (100) LAN (100) (BD STORAGE) USB HDMI OUT HDMI OUT
To HDMI
input terminal
AV receiver
or amplifier
From HDMI
output
terminal
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
according to the type of cable connected (page 19).
• To output video signals from this player, connect
using one of the following (not including when
connected using an HDMI cable): a component video
cable or a video cable.
Connecting a TV using a
video/audio cable
Caution
• Connect the player's video output directly to
your TV.
This player supports analog copy protection
technology. Therefore the picture may not be
displayed properly if connected to a TV via a DVD
recorder/video deck or when playing the player's
output material that is recorded by a DVD recorder/
COMPONENT VIDEO COMPONENT VIDEO CENTER CENTER SUB WOOFER SUB WOOFER
OUT OUT Y Y
VIDEO VIDEO
P P
L L B B
L L
R R P P R R
R R
FRONT FRONT SURROUND SURROUND SURROUND SURROUND
BACK BACK
IN IN AUDIO OUT(7.1 ch) AUDIO OUT(7.1 ch)
Match the direction
of the plug to the
terminal and insert
straight.
To HDMI input
terminal
TV
Direction of signal flow