Subscribe to Our Youtube Channel
Related Manuals for TP-Link TL-SH1005
Summary of Contents for TP-Link TL-SH1005
- Page 1 Machine Translated by Google Enterprise Networking Solution Installation Manual 2.5Gbps Ethernet switch TL-SH1005...
- Page 2 Machine Translated by Google statement Copyright © 2020 Pulian Technology Co., Ltd. All rights reserved. Without the express written permission of Pulian Technology Co., Ltd., no unit or individual may copy, copy, copy or translate part or all of the contents of this manual without authorization, and no part or all of the contents of this manual may be reproduced in any way (electronically, photocopied, recorded, etc.) for profit.
- Page 3 Introduces the installation and startup process of 2.5Gbps Ethernet switches If the problem still cannot be solved through the guidance of relevant documents, please contact the TP-LINK technical support service center directly and we will provide you with technical support services.
- Page 4 Machine Translated by Google Reading object This manual is suitable for the following people: Network Engineer network administrator Agreement In the following parts of this manual, the product pictures involved are for illustration only, please refer to the actual model. This manual uses the following eye-catching symbols to indicate the points that should be paid attention to during operation.
-
Page 5: Table Of Contents
Machine Translated by Google Table of contents Chapter 1 Product Introduction—————————————— 01 1.1 Product Introduction............01 1.2 Product appearance............01 Chapter 2 Product Installation—————————————— 03 2.1 List of items............03 2.2 Installation precautions..........03 Chapter 3 Hardware Connection—————————————— 06 3.1 Connecting the RJ45 port.........06 3.2 Connecting the power supply........ -
Page 6: Chapter 1 Product Introduction
2.5Gbps Ethernet Switch Installation Manual Chapter 1 Product Introduction 1.1 Product introduction TL-SH1005 is a 2.5Gbps Ethernet switch independently developed by Pulian Technology Co., Ltd., providing five 2.5Gbps RJ45 ports. 1.2 Product appearance ÿ TL-SH1005 The front panel of TL-SH1005 is shown in Figure 1-1. - Page 7 Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual 2 Link/Act indicator (2.5Gbps) Indicator light working status working instructions The green light indicates that the port connected to the device has a rate of 2.5Gbps. Link/Act Transferring data flashing (2.5Gbps) Off, no network device connected 3 Link/Act indicator (1Gbps/100Mbps)) Indicator light working status working instructions...
-
Page 8: Chapter 2 Product Installation
Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual Chapter 2 Product Installation 2.1 Item list a switch a power adapter an installation manual Four foot pads A warranty card and a toxic and hazardous substance content statement Warranty Card Note: ÿ... - Page 9 Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual ÿ Installation environment precautions temperature humidity To ensure long-term stable operation of the switch and extend its service life, please maintain a certain temperature and humidity in the environment. Too high or too low ambient humidity can easily cause leakage, deformation and even corrosion of metal parts in insulating materials.
- Page 10 Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual Lightning protection requirements When a lightning strike occurs, a strong current will be generated in an instant, and the air on the discharge path will be instantly heated to 20,000 degrees Celsius. The instantaneous high current is enough to cause fatal damage to electronic equipment.
-
Page 11: Chapter 3 Hardware Connection
Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual Chapter 3 Hardware Connection 3.1 Connect the RJ45 port As shown in Figure 3-1, connect the switch and the peer device through the RJ45 port. RJ45 port Crystal Head Figure 3-1 RJ45 port connection diagram 3.2 Connect the power supply Using 12VDC 1A DC power supply: 1. -
Page 12: Device Initialization
Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual 3.3 Device initialization After the switch is powered on, it will automatically initialize. At this time, the indicator light will appear as follows: ÿ Check the status of the Power indicator on the switch panel. If it is on, it means the power supply is connected correctly; if it is off, it means the power supply is abnormal; ÿ... -
Page 13: Appendix A Technical Parameters
Machine Translated by Google 2.5Gbps Ethernet Switch Installation Manual Appendix A Technical Parameters and Specifications IEEE 802.3 Ethernet Media Access Control (MAC) Protocol IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-X Fast Ethernet (twisted pair or fiber optic) technical standard IEEE802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bz:2.5G/5GBASE-T Ethernet IEEE 802.3x: flow control Ethernet 10Mbps half duplex, 20Mbps full duplex... - Page 14 Machine Translated by Google...
- Page 15 Machine Translated by Google...
- Page 16 Company address: 1st floor, 3-5 floors in the south section of Building 24, Industrial Factory Building 24, Shennan Road Science and Technology Park, Nanshan District, Shenzhen City, 1-4 floors in the north section of Building 28 Company website: http://www.tp-link.com.cn Technical support hotline: 400-8863-400 E-mail: smb@tp-link.com.cn...
Need help?
Do you have a question about the TL-SH1005 and is the answer not in the manual?
Questions and answers