Subscribe to Our Youtube Channel
Related Manuals for TP-Link TL-SH1832
Summary of Contents for TP-Link TL-SH1832
- Page 1 Machine Translated by Google Enterprise Networking Solution Installation Manual 10G uplink Ethernet switch TL-SH1832...
- Page 2 Machine Translated by Google statement Copyright © 2022 Pulian Technology Co., Ltd. All rights reserved. Without the express written permission of Pulian Technology Co., Ltd., no unit or individual may copy, copy, copy or translate part or all of the contents of this manual without authorization, and no part or all of the contents of this manual may be reproduced in any way (electronically, photocopied, recorded, etc.) for profit.
- Page 3 Introduces the installation and startup process of 2.5Gbps Ethernet switches If the problem still cannot be solved through the guidance of relevant documents, please contact the TP-LINK technical support service center directly and we will provide you with technical support services.
- Page 4 Agreement In the following parts of this manual, unless otherwise specified, TL-SH1832 is used as an example to introduce the products involved. This is for illustrative purposes only, please refer to the actual model. This manual uses the following eye-catching symbols to indicate the points that should be paid attention to during operation. The meaning of these symbols is: The meaning is as follows: This icon indicates a warning that requires attention.
-
Page 5: Table Of Contents
Machine Translated by Google Table of contents Chapter 1 Product Introduction———————————— 01 1.1 Product Introduction............01 1.2 Product Appearance ............01 Chapter 2 Product Installation———————————— 03 2.1 List of items............03 2.2 Installation precautions..........03 2.3 Preparation of installation tools..........06 2.4 Product installation.......... -
Page 6: Chapter 1 Product Introduction
10 Gigabit Uplink Ethernet Switch Installation Manual Chapter 1 Product Introduction 1.1 Product introduction TL-SH1832 is a 10G uplink Ethernet switch independently developed by Pulian Technology Co., Ltd. It provides 24 2.5Gbps RJ45 ports and 8 10Gbps SFP+ ports. 1.2 Product appearance ÿ... -
Page 7: Product Introduction 02
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual Indicator light working status working instructions Steady green corresponds to a port connection rate of 2.5Gbps The yellow light corresponds to a port connection rate of 10/100/1000Mbps. Link/Act (1-24) Flashing: There is data transmission on the corresponding port. -
Page 8: Chapter 2 Product Installation
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual Chapter 2 Product Installation 2.1 Item list a switch a power cord an installation manual Installation Manual 10 Gigabit Uplink Ethernet Switch Two L-shaped brackets for fixing to the rack A warranty card and a toxic and hazardous substance and other accessories content statement... - Page 9 Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual ÿ Before cleaning the switch, unplug the power plug. Do not wipe it with wet fabric or use liquids. cleaning; ÿ During use, please keep the bottom of the switch facing down and place it horizontally to avoid potential safety hazards. ÿ...
- Page 10 Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual electromagnetic interference Electromagnetic interference will affect electronic components such as capacitors and inductors inside the equipment through conduction methods such as capacitive coupling, inductive coupling, and impedance coupling. To reduce the adverse effects of electromagnetic interference factors, please pay attention to the following matters: ÿ...
-
Page 11: Preparation Of Installation Tools
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual 2.3 Preparation of installation tools ÿ Philips screwdriver ÿ Anti-static bracelet 2.4 Product installation ÿ Install on the desktop Users can place the switch on a stable desktop. This installation method is relatively simple to operate. The specific installation steps are as follows: Note: Leave a 5-10cm gap around the switch case to ensure heat dissipation and air circulation. - Page 12 Excellent grounding method. ÿ If you install TP-LINK enterprise-grade steel shell products in the computer room and there is a dedicated grounding bar in the computer room, you should First consider using a ground wire to connect the equipment to the ground bar.
-
Page 13: Chapter 3 Hardware Connection
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual Chapter 3 Hardware Connection 3.1 Connect the RJ45 port The switch provides 24 RJ45 ports. The connection process with the peer Ethernet port is as follows: 1. Connect one end of the network cable to the switch and the other end to the peer device, as shown in Figure 3-1; RJ45 port RJ45 port Crystal Head... -
Page 14: Connecting The Sfp+ Port
Note: ÿ Please use 10G SFP+ optical module, TP-LINK optical module product is recommended, see Appendix B for details; ÿ Please select the optical fiber cable according to the module type, multi-mode module corresponds to multi-mode optical fiber, and single-mode module corresponds to single-mode optical fiber; ÿ No Excessive bending of optical fiber is allowed, and the radius of curvature should not be less than 10cm;... -
Page 15: Device Initialization
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual 3.4 Device initialization After the switch is powered on, it will automatically initialize. At this time, the indicator light will appear as follows: ÿ Check the status of the Power indicator on the switch panel. If it is on, it means the power supply is connected correctly. If it is off, it means the power is being supplied. abnormal;... -
Page 16: Appendix A Technical Parameters And Specifications
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual Appendix A Technical Parameters and Specifications Model TL-SH1832 IEEE 802.3: Ethernet Media Access Control (MAC) Protocol IEEE 802.3i: 10BASE-T Ethernet IEEE 802.3u: 100BASE-X Fast Ethernet (twisted pair or fiber optic) IEEE 802.3ab: 1000BASE-T Gigabit Ethernet IEEE 802.3z: 1000BASE-... -
Page 17: Appendix B Supplementary Instructions For Connecting The Optical Port
Machine Translated by Google 10 Gigabit Uplink Ethernet Switch Installation Manual Appendix B Supplementary instructions for connecting optical ports optical fiber Optical fiber is the abbreviation of optical fiber. It is a light transmission tool that utilizes the principle of total reflection of light in fibers made of glass or plastic. Optical fiber is the most ideal among various transmission media in broadband networks. - Page 18 Machine Translated by Google...
- Page 19 Machine Translated by Google...
- Page 20 Company address: 1st floor, 3-5th floor of the south section of Building 24, Science and Technology Park Industrial Factory, Shennan Road, Nanshan District, Shenzhen City, 1st-4th floor of the northern section of Building 28 Company website: http://www.tp-link.com.cn Technical support hotline: 400-8863-400 E-mail: smb@tp-link.com.cn...
Need help?
Do you have a question about the TL-SH1832 and is the answer not in the manual?
Questions and answers