Subscribe to Our Youtube Channel
Related Manuals for Quick TS11
Summary of Contents for Quick TS11
- Page 1 QUICK TS11 Soldering Station Instruction Manual Thank you for purchasing our products. Please keep the instruction manual properly for future reference.
-
Page 2: Table Of Contents
Contents 1. Safety Instructions................1 2. Overview....................2 3. Product Characteristics............... 2 4. Product Specifications.................3 5. Functional Descriptions...............4 5.1. Dimensions................4 5.2. Part Descriptions...............4 5.3. Key Descriptions............... 5 5.4. Function Descriptions of the Main Interface......6 6. Connection.................... 6 7. Temperature Settings................7 8. -
Page 3: Safety Instructions
1.Safety Instructions CAUTION During the installation and use of this product, all electrical safety regulations of the country and regions must be strictly observed. The power supply must be disconnected when disassembling the product. Do not operate with power on. ... -
Page 4: Overview
2.Overview This soldering station is designed for precision soldering with lightweight handle and soldering tip. The main unit features color LCD and precise temperature. The all-in-one soldering tip with heater is thermos-sensitive in fast heating and rapid thermal recovery, which makes the soldering station an ideal tool for precision soldering. -
Page 5: Product Specifications
4.Product Specifications Product model TS11 Display Power consumption Voltage AC 110/220V Temperature range 100℃～450℃/212℉～842℉ Tip to ground potential ＜2mV Tip to ground resistance ＜2Ω Dimensions (L×W×H） 116*149*93mm Weight About 1.8 Kg... -
Page 6: Functional Descriptions
5.Functional Descriptions 5.1.Dimensions Unit：mm 5.2.Part Descriptions... -
Page 7: Key Descriptions
5.3.Key Descriptions Symbols Function Descriptions 1.Long press for 2S to enter the menu setting interface 2.In the main interface,keep short press to select CH1-CH3 circularly POWER Long press to turn on/off Turn up temperature in the main interface Page down in the menu interface Turn down temperature in the main interface Page up in the menu interface Press the two keys at once to enter the... -
Page 8: Function Descriptions Of The Main Interface
5.4.Function Descriptions of the Main Interface 6.Connection 1) Insert the seven-core plug at the other end of the soldering handle into the seven-core socket on the main unit panel (pay attention to the insertion position of the plug), and place the soldering handle in the holder. -
Page 9: Temperature Settings
7.Temperature Settings Note: 1) When setting the soldering temperature, please make sure the soldering temperature is adjustable. 2) Input the correct password, or the initial password "000". There are 3 temperature channels. Keep short pressing "SET" key to select CH1 ~ CH3 recurrently. You can press "+" or "-" key to change current temperature, which does not overwrite the stored temperature of the 3 temperature channels. -
Page 10: Menu Settings
8.Menu Settings 1) Long press the "SET" key to enter the menu setting interface. 2) Press "+" or "-" key to turn the page. 3) Press "SET" key to enter the parameter setting interface, and then press "+" or "-" for value selection or setting. 4) Press "SET"... -
Page 11: Password Settings
9.Password Settings 1）Press "+" or "-" key, and select "Password" setting. 2）Press "SET" key to enter "Password" setting interface. Press "+" or "-" to input the password (initial password is "000"), then press "SET" to enter the new password input interface. Press "+" or "-" to select a digit (0~9), and press "SET"... -
Page 12: Shutdown Time Settings
Press "SET" key to confirm, and go back to the main interface when "OK" is displayed on the screen. Note: * It is recommended to use QUICK 191/192 to measure tip temperature. * If the password is locked, the temperature cannot be... -
Page 13: Maintenance Of Tips
13.Maintenance of Tips 1) When the new tip is used for the first time, add tin to protect it when the temperature is 250 ~ 280 ℃. 2) Select the appropriate tip size according to the size of soldering joint. 3) In order to prevent the oxidation of tip, a layer of melting tin should be plated before placing it into the holder. -
Page 14: Troubleshooting
15.Troubleshooting Error Message Descriptions No handle Short circuit of the heater. Handle error Insert the matching handle The heater is not inserted or in Senor abnormity wrong position. Please power off and re-insert. Heater abnormity Open circuit of the heater.
Need help?
Do you have a question about the TS11 and is the answer not in the manual?
Questions and answers