Table of Contents
Advertisement
Quick Links
QUICK7610
BGA/SMD Rework System
Operation Manual
Thank you for purchasing our IR Rework System. The system is exclusively designed
for reworking and soldering SMD component. Please carefully read this manual before
operating the system. Store this manual in a safe, easily accessible place for future
reference.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Quick QUICK7610
Summary of Contents for Quick QUICK7610
- Page 1 QUICK7610 BGA/SMD Rework System Operation Manual Thank you for purchasing our IR Rework System. The system is exclusively designed for reworking and soldering SMD component. Please carefully read this manual before operating the system. Store this manual in a safe, easily accessible place for future...
-
Page 2: Table Of Contents
QUICK7610 Operation Manual Table of Contents 1. Summary ........................1 2. Specification and Technical Parameter ................ 1 2.1 Specification ......................1 2.2 Technical Data ..................... 2 3. Product Picture ......................2 4. Safety instructions………………………………………………………………………3 5. Install the Unit and Adjust Parts……………………………………………………………3 5.1 Place the Unit ...................... -
Page 3: Summary
The middle-wavelength infrared heater of QUICK7610 has a well-proportioned and safe heating and power and flexibleness necessary for the system, so it can also deal with some PCBs with big thermal capacity and other high temperature situation (lead-free soldering) easily. -
Page 4: Technical Data
QUICK7610 Operation Manual 2.2 Technical Data TL: Melting temperature of solder T1: Heat preservation starting temperature of reflow soldering T2: Heat preservation ending temperature of reflow soldering T3: Peak value temperature of soldering and de-soldering T0: Valve temperature: The lowest temperature of bottom heater when top heater heats up. T0<TB... -
Page 5: Install The Unit And Adjust Parts
QUICK7610 Operation Manual Caution: Top and bottom infrared heater and sirocco nozzle will be very hot during working, so explosive and combustible object or gas and solvent is strictly prohibited in working areas, also please don’ touch the hot surface parts. -
Page 6: Connect The Unit
QUICK7610 Operation Manual 5.3 Connect the Unit RS232 Power Outer cooling fan Please check whether the power voltage accords with the rated voltage on the equipment nameplate. Please check whether switches are turned off before connection. Connect Power cord to the power socket behind equipment. -
Page 7: Keyboard And Parameter Setting
QUICK7610 Operation Manual 6. Keyboard and Parameter Setting 6.1 Keyboard A． When select workflow,“+”、“-”key control cursor up down movement or the digital increase and decrease. B． When waiting state, press“+”、“-”key, top heating movement up and down. C． The function of “SET” key is BGA-IR enter parameter setting state, and cursor enter next menu (when change digital, cursor select next digital). - Page 8 QUICK7610 Operation Manual _laser: off D． (Working mode settings) _baud: 19200 （Working mode settings） E． A. Input password The initial password of system is “000”. At the same time, system also has the omnipotent password “159”. If you forget the setting password, you can input “159” to make the password of system come back to initial password “000”.
- Page 9 QUICK7610 Operation Manual Finish password inputting: 1. If you want to modify the password, return to above mode to input the new password. If password is modified successfully, it will show: Saving Password! Any key return 2．If you want to modify the next working flow, operate as the following B item. If you don’t want to modify, please press “DOWN”...
- Page 10 QUICK7610 Operation Manual C. Modify working mode For instance: Modify the working mode and make it in “desolder” mode. Press “-” Press “SET” password: *** select: 1 select: 1 type: solder Press “-” or “+” Press “OK” select: 1 select: 1...
- Page 11 QUICK7610 Operation Manual range between T2 and T3. T0 is the valve temperature for bottom heater required by top heater when it heats up. Also it is the first temperature of this technics process. When the work flow STARTs, the bottom heater starts to heat up.
- Page 12 QUICK7610 Operation Manual Password It is used for setting password. It is designed for preventing the equipment unnecessary or non-authorized change. When it is set to “000”, the password protecting is useless. The password is used for all flows and it can be useful and useless in each flow. The system requires inputting correct password before any change.
- Page 13 QUICK7610 Operation Manual Press “SET” Press “+” S1: 060s S1: 060s Press “OK” Press “-” T2: 160℃ T2: 160℃ Press “SET” Press “SET” T2: 160℃ T2: 160℃ S2: 030s S2: 030s T2: 160℃ T2: 160℃ Press “+” 2 times Press “OK”...
- Page 14 QUICK7610 Operation Manual Press “-” Press “-” TL: 183℃ TB: 130℃ TB: 130℃ T0: 090℃ Press “-” Press “-” T0: 090℃ unit:℃ unit:℃ sense: IR Senser: IR type: desolder D. Modify laser alignment mode For instance: Modify the laser alignment mode and set it to “on”.
-
Page 15: Technology Instruction
QUICK7610 Operation Manual 1. After finishing the modification, the next step communication speed, will not be able modified by keyboard. 2. Press “EXIT” key to exit. Now, the system has saved all parameter settings, IR window will display: TC:022℃ Tb:019℃... -
Page 16: Soldering Technology
QUICK7610 Operation Manual 7.1 Soldering Technology 1． Turn on power switch of each part. 2． Move PCB Fixture with fixed PCB to make PCB over the Bottom Heater and make the soldered component between Top Heater and Bottom Heater. The position is easy to be measured with laser alignment device. -
Page 17: Soldering Technology
QUICK7610 Operation Manual 7.2 De-soldering Technology 1. Turn on power switch of each part. 2. Fix the PCB on the top of Bottom Heater and make the de-soldered component between Top Heater and Bottom Heater. The position is easy to be measured with laser alignment device. -
Page 18: Toxic And Harmful Substance Or Element Form
QUICK7610 Operation Manual toxic and harmful substance or element component Cr(VI) PBDE ○ ○ ○ ○ × × transformer ○ ○ ○ ○ ○ wire × ○ ○ ○ ○ ○ × Welding spot ○ ○ ○ ○ × ×...
Need help?
Do you have a question about the QUICK7610 and is the answer not in the manual?
Questions and answers