Initial Installation - Daewoo SD-3500P Owner's Manual

Initial Installation

I Switch the TV on.
I You can also start "AUTO SET" in the SETUP "PR PRESET"
I To tune in new stations (manual tuning) and enter station names see page 25-26.
Setting up the player
You should see this picture the first time you switch on the TV
1
and player.
OK for "AUTO SET!".
2
"AUTO SET" tunes in all the stations you can receive in your
country and sorts them in an order common for your country.
Clock is automatically set.
If other stations are positioned on near the current RF OUTPUT
3
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
Press the [OK] button to confirm the recommended PR.
4
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 26.
Otherwise ...
exit the basic installation function and enjoy your player.
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
• In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
But use the optimum CH number first!
18
"AUTO SET".
AUTO SET
OK:CONFIRM SETUP:END
CH 25
PLEASE WAIT...
SETUP:END
RF OUTPUT SET
CURRENT CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
MANUAL SET
PR01 BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END