Setting Up Your Player - Daewoo SD-3500P Owner's Manual

Setting up your player

I Before you start, unplug all the equipment from the mains supply.
(Option 1) - Connecting your player through RF lead
230V~,
50/60 Hz
(Option 2) - Connecting your player through a scart lead
Television
230V~,
50/60 Hz
With this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the
[TV/VCR] button on the remote control, your TV will automatically display the CH BBC1. "VCR" will be
shown in the display.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used.
To switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will
get better pictures and sound quality if you connect your player using a scart lead.
12
Television
Back view of your player
Scart lead (supplied only
SD-9500P&SD-9800P )
Back view of your player
Aerial
The type of aerial you
should use, depends on
local interference and how
far you are from the
transmitter. You should
contact a local retailer if you
have any questions about
your aerial.
Aerial