Algam Lighting BUBBLE PRO Manual page 13

OPERATION INSTRUCTIONS
1 2
1 Front fan vent
2 Tank
3 Bubble wand
4 Carry handle
5 ON/OFF/REMOTE Switch
6 Rear fan vents
7 Fluid drain tap
8 Remote Socket
9 IEC Power Socket
REPLACING THE FUSE
Disconnect from the main power supply first, then remove the fuse holder part of the IEC Socket to reveal the fuse.
Replace the correct fuse rating as stated on the product. Lock the fuse holder cover back into place.
REMOTE
Transmitter
3 4
BUBBLE PRO
Receiver
Press the buttons to activate bubble production.
5 6
ON OFF REMOTE
BUBBLE PRO
REMOTE
POWER IN
230V~ / 50-60Hz
FUSE 2A
POWER RATING 50W
8 9
P.13
7
WARNING !
USE ALGAM LIGHTING FLUID ONLY
DISCONNECT POWER BEFORE ADDING FLUID.
DO NOT OPERATE WITHOUT FLUID.
ATTENTION !
UTILISER UNIQUEMENT LES LIQUIDES ALGAM LIGHTING.
DÉBRANCHER L' A PPAREIL AVANT REMPLISSAGE.
NE JAMAIS UTILISER L' A PPAREIL SANS LIQUIDE.
ALGAM, 2 RUE DE MILAN,
44470 THOUARÉ-SUR-LOIRE, FRANCE
MADE IN CHINA
B