Download Print this page

Advertisement

Quick Links

WISE ALSa
Instructions for Use
Key to symbols
Symbols on the machine
This product complies with applicable EU
directives
Symbols in these Instructions for Use
Warning/Caution!
Risk of crushing
The document was originally written in Swedish
Application area
The product is a variable flow product or a constant flow
product with integrated radio transmitter designed for
comfort ventilation indoors within Swegon's system for
demand-controlled ventilation WISE. The product is used
to regulate the supply air flow in the ventilation duct.
The product may not be used for anything other than its
intended use.
General
Read through the entire Instructions for Use
before you install/use the product and save
the instructions for future reference. It's not
permissible to make changes or modifications
to this product other than those specified in
this document.
The packaging contains the following
items
1 x WISE ALS
1 x Instructions for Use
Compatibility
WISE ALS is an active commissioning box intended for
Swegon's WISE system for demand-controlled ventilation.
WISE ALS is compatible with the following air diffusers:
• COLIBRI C VF SMB
• LOCKZONE C VF SMB
• KITE CC SMB
• KITE CR SMB
WISE ALS and the associated diffusers are packaged
separately and assembled on site.
In this document, the designation of the article bundle
always refers to the WISE ALS commissioning box includ-
ing the respective diffuser.
The WISE ALS commissioning box and compatible diffuser
are included in the following bundles:
WISE Colibri C SMB
WISE Lockzone C SMB
WISE Kite CC SMB
WISE Kite CR SMB
31/05/2024
Art. 1546302
WISE ALS incl. COLIBRI CC VF SMB
WISE ALS incl. LOCKZONE C VF SMB
WISE ALS incl. KITE CC SMB
WISE ALS incl. KITE CR SMB

Advertisement

loading
Need help?

Need help?

Do you have a question about the WISE ALS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Swegon WISE ALS

  • Page 1 1 x WISE ALS 1 x Instructions for Use Compatibility WISE ALS is an active commissioning box intended for Swegon’s WISE system for demand-controlled ventilation. WISE ALS is compatible with the following air diffusers: • COLIBRI C VF SMB •...
  • Page 2: Protective Equipment

    • Check that the product is properly secured after it has been installed. • Use the product’s eyes to secure the cables with cable ties. • Check that all cables are properly secured in place after installation. Swegon reserves the right to alter specifications. 31/05/2024...
  • Page 3 CL = Centreline ØD Ød Figure 1. WISE Colibri C SMB, dimensions. WISE Lockzone C SMB Dimensions (mm) Size Weight (kg) ØD Ød 11.5 CL = Centreline ØD Ød Figure 2. WISE Lockzone C SMB, dimensions. 31/05/2024 Swegon reserves the right to alter specifications.
  • Page 4 ØD Ød Figure 3. WISE Kite CC SMB, dimensions. WISE Kite CR SMB Dimensions (mm) Weight Size (kg) ØD Ød 10.9 CL = Centreline ØD Ød Figure 4. WISE Kite CR SMB, dimensions. Swegon reserves the right to alter specifications. 31/05/2024...
  • Page 5 WISE ALS Installation • WISE ALS air flow measurement requires a straight duct section before the product according to the instal- lation figures. Figure 5. Straight duct section requirements. 1-3: Quantity Ø before the product: 0 x Ø. 4: Quantity Ø before the product: 1 x Ø.
  • Page 6 NOTE! 24 V DC supply Commissioning air/ Orange/Violet Alternating water ADAPT Relay 24 V DC Emergency mode Green/Red Alternating Service mode Blue Short flash every 5 s Ground Connection of relay for connection of additional actuators Swegon reserves the right to alter specifications. 31/05/2024...
  • Page 7: Troubleshooting

    • Make sure that the temperature sensor does not hang been approved in writing by Swegon AB; or (2) the serial outside the product. number on the product has been made illegible or is missing.
  • Page 8 WISE ALS Suspension of WISE ALS with diffuser and connection of WISE SMB POWER Figure 7. Suspension of WISE ALS with diffuser, connection of WISE SMB. Swegon reserves the right to alter specifications. 31/05/2024...
  • Page 9 The diffuser face hangs on the corresponding side by the hinge. Figure 8. Dismantling of diffuser face for air diffusers with Easy Figure 9. Dismantling of diffuser face for air diffusers with Quick Access. Access. 31/05/2024 Swegon reserves the right to alter specifications.
  • Page 10 Fold away the perforated mesh. 2. Turn the damper insert so that the bayonet fitting releases. Pull out the damper insert. Figure 10. Dismantling the damper insert. Reassemble in the reverse order. Swegon reserves the right to alter specifications. 31/05/2024...
  • Page 11 Figure 11. Replacement of WISE CU. Reassemble in the reverse order, and connect hoses and contacts to WISE CU, see “Connection”. Apply the new supplied QR codes over the existing QR codes on the product. 31/05/2024 Swegon reserves the right to alter specifications.
  • Page 12: Technical Data

    WISE Lockzone Ceiling product data sheet WISE Kite Ceiling product data sheet WISE System Guide WISE User Manual WISE Project Planning Guide – Heating, cooling & ventilation WISE Project Planning Guide – Electricity & control Swegon reserves the right to alter specifications. 31/05/2024...