Table of Contents
Advertisement
Bluetooth®
Making a Bluetooth
Connection
The following sections cover how to connect your
phone to another Bluetooth device.
Note: Some Bluetooth devices only have full
functionality when DTMF dialing is set to
On. See "Phone Calls Features" on
page 115.
Sharing Your Phone's Bluetooth
Address
To bond with your phone, devices must have your
phone's Bluetooth address. To find devices that
you want to bond with, you can make your phone
discoverable, so that other devices learn your
phone's Bluetooth address. You can also have
your phone search for Bluetooth devices to learn
their addresses.
Allowing Bluetooth
®
Phone
To let devices find your phone and its Bluetooth
address, place your phone in discoverable mode.
Discoverable mode lasts for 60 seconds. During
this time, other devices that are within range can
detect your phone. You can then choose to grant
or deny each device's request to bond.
90
®
®
Devices to Find Your
Note: You must grant the device's request in
order to receive information from the
device on your phone.
To start discoverable mode, from the main
menu, select Bluetooth > Find Me.
Discovering Bluetooth
To have your phone search for Bluetooth devices:
From the main menu, select Bluetooth > Hands
Free > [Find Devices].
A list of hands free devices displays. Devices
that do not have a name are listed by their
Bluetooth address.
To stop the search and go to the list of found
devices, press A under Stop.
To stop the search and return to the previous
screen, press A under Cancel.
Bluetooth
®
Bonds
A bond is an encryption key that is generated when
two Bluetooth devices exchange a common PIN.
This key verifies the identity of each device, and
encrypts any data transferred between the devices.
Once the PIN is exchanged, the devices do not
have to be in discoverable mode in order to
exchange information. You only need to create a
bond once between two devices.
Devices
®
Advertisement
Table of Contents
