Indicators
The Power and Lamp indicators show the status of the projector. Before
requesting repair, check the projector status using the chart below. If the
problem cannot be resolved contact your dealer.
Power
Lamp
(Green)
(Red)
Slow
Off
flashing
On
Off
Slow
On
flashing
Fast
On
flashing
Fast
On
flashing
Fast
Fast
flashing
flashing
Condition
Notes
Stand by
*Projector is ready to be turned on (normal)
mode
On mode
*Projector is on and operating normally
Cool-down
*Projector is in cool-down mode and will not
mode
respond to user input (normal)
* The projector has detected a problem with an
Fan-fault
internal fan, the lamp will shut off automatically,
mode
contact your dealer
*The lamp cover is open or there is a problem
Lamp-cover
with the lamp. If the lamp door is closed and
open
replacing the lamp does not correct the issue,
contact your dealer.
*The projector has overheated and shut the
lamp off. Correct the over temp condition
immediately.
High
1. Check that the ventilation slots are free from
temperature
obstructions
2. Check the cleanliness of the air filter.
3. If the condition persists, contact your dealer
-49-
Multimedia LCD Projector
Need help?
Do you have a question about the CP755ew and is the answer not in the manual?