Advertisement
B
"RATB" ог "RB-TA" positions will allow you to operate a repeater ог split transmit/receive
frequencies.
|
FOR
EXAMPLE:
Set the VFO GANG Switch in the "GANG" position and turn the POWER Switch ON. "B" VFO
will be preset GOOKHz above "A" VFO.
Set "A" VFO to 145.125.0MHz
or "B" VFO to 145.725.0MHz.
Then set the VFO/MEMORY
Switch to the "RB-TA" position.
145.725.0MHz will be shown on the readout during receive ("В"
VFO) and 145.125.0MHz during transmit ("A" VFO).
You are now receiving on 145.725.0MHz
and transmitting on 145.125.0MHz, so you can access a 145.125/145.725 repeater.
FOR
EXAMPLE:
FOR
EXAMPLE:
FOR
EXAMPLE:
—16-
Advertisement
Need help?
Do you have a question about the IC260-A and is the answer not in the manual?
Questions and answers