Loading The Top Rack - Bosch Integra SHV99A13UC Use And Care Manual

Preparing and Loading the Dishware
Top Rack Accessories
Knife Rack
The knife rack is an extra shelf for knives and
other large utensils. It is assembled onto an edge
of the upper rack.
Place knives
with sharp
sides down,
see Fig. 5.

Loading the Top Rack

Figure 6 shows
how to arrange
a typical mixed
load in the
top rack.
Figure 7
shows how
to arrange
items from
a typical
10 place
setting in
the top rack.
Figure 8 shows
the top rack
load pattern
for 12 place
settings.
6
Figure 5
Figure 6
Figure 7
(AHAM DW-1 10 Place Setting)
Figure 8
(AHAM DW-1 12 Place Setting)
(continued)
NOTE: When pushing the top rack into the
dishwasher, push it until it stops against the back
of the tub. Otherwise, the top rack spray arm may
not connect to the water supply.
Bottom Rack Accessories
Flip Tines
Flip Tines fold down to make loading the racks
easier in some instances.
Grasp the
tines
as shown
in Figure 9
and fold
the tines
downward.
Rack Attachment
The rack attachment has two additional cup
shelves upon which to place cups and large
kitchen utensils. The rack attachment is as-
sembled on the rear edge of the lower rack.
To assemble:
Slide the Rack Attachment in, Figure 11, keeping
the longest tines on the inside of the top basket
wire (a) and on the outside of the lower basket
wire (b), see Fig. 10.
The short tines will snap into place, see Figure
12.
Figure 10
Rear
corner
a
view of
Rack
inset
b
Rack Attachment
Use
To use the rack
attachment, fold
down the cup
shelves and place
items to be
washed, see
Figure 12.
Figure 9
Figure 11
Figure 12