Magnifying And Searching For Details; Selecting The Aspect Ratio - BenQ MU686 User Manual

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
1. Press MENU and then press
2. Press
3. Press
4. To navigate the picture, press OK to switch to the panning mode and press the
directional arrows ( ,
the picture.
5. To reduce size of the picture, press AUTO to restore the picture to its original size.
You can also press
The picture can only be navigated after it is magnified. You can further magnify the picture while searching for
details.

Selecting the aspect ratio

The "aspect ratio" is the ratio of the image width to the image height. Most analog TV and
some computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected picture ratio (no matter what aspect the source is):
• Using the remote control
1. Press ASPECT to show the current setting.
2. Press ASPECT repeatedly to select an aspect ratio to suit the format of the video
signal and your display requirements.
• Using the OSD menu
1. Press MENU and then press
2. Press
3. Press
display requirements.
28 Operation
to highlight Digital Zoom and press OK. The Zoom bar appears.
repeatedly to magnify the picture to a desired size.
,
repeatedly until it is restored to the original size.
to highlight Aspect Ratio.
/ to select an aspect ratio to suit the format of the video signal and your
/ until the DISPLAY menu is highlighted.
, ) on the projector or remote control to navigate
/ until the DISPLAY menu is highlighted.