Signaling And Notify - AT&T Merlin Legend MLX-10 User Manual

Features

Signaling and Notify

Use Signaling to beep or use Notify to turn on a light on a co-
worker's phone.
Signaling. To use Signaling, program a Signal button. You
can then signal your co-worker without lifting your handset.
Your co-worker's phone beeps for as long as you hold down
the button.
You can use Signaling even when you and/or your co-worker
are on the phone. The green light next to your Signal button
shows when your co-worker is on the phone or using Do Not
Disturb. (Do Not Disturb prevents Signaling.)
If you have already programmed an Auto Dial button for a
co-worker, do not program a Signal button for that extension.
(You can only have one or the other.) Instead, reprogram that
Auto Dial button as a Signal button. Then, when you need
to call, lift the handset or press Speaker, and press the
Signal button to dial the extension automatically.
Notify. To use Notify, program a Notify Send button on your
phone and a Notify Receive button on your co-worker's
phone, or program a Notify Receive button on your phone
and a Notify Send button on your co-worker's phone (both
buttons must be programmed). When you press Notify
Send, the green light next to your co-worker's Notify Receive
button goes on.
5-68 Signaling and Notify