Advertisement
Quick Links
Installation & Operations Manual
Kubota RTV 500 Soft Top & Rear Panel
How to use this manual:
• Be sure to read through the entire manual carefully before beginning installation.
• Read all warnings and precautions carefully and follow safety procedures
• Each Seizmik product has a "difficulty-to-install" rating based on the following:
•Easy – uses basic hand tools and does not require any modifications to the existing structure of your vehicle. Most Seizmik
products fall into this category. Hey, why be difficult?
•Skilled – requires a little more skill to install properly. May require modifications to the vehicle (drilling, electrical, etc. as well as
the use of power tools.
•Difficult – May require welding or extensive mechanical work for proper installation. Hardly any Seizmik products fall into this
category but we had to say it.
• Watch for the following symbols:
Installation information:
• This product has an installation rating of: Easy
• Approximate installation time: 5 Minutes
• This product is easiest to install with: 1 Person
CAUTION – Indicates an installation or operational step or procedure that if not followed could result
in damage to the product or you. Use caution when you see this symbol and follow all instructions.
TIP – Indicates an installation or operation tip. These tips can help you avoid installation problems,
ensure safe and easy operation, and make sure everything goes smoothly.
WARNING – Indicates an installation or operational procedure that must be observed to prevent
serious injury or death.
Seizmik makes Windshields, Doors,
Tops, Hood Racks, Brush Guards, and
other great accessories for utility
vehicles & side x sides. Our products
are engineered tough for long life
and tested under the harshest of
conditions. Always observe the
warnings and precautions in this
manual when using your Seizmik
products. For best results, carefully
follow the instructions in this manual
and make no modifications.
Seizmik products are designed,
developed and manufactured by
Vialink Corp. If you have any
questions, comments, need
assistance, or are missing parts, please
call 1-866-838-3366 ext.110 between
9:00AM and 5:00PM EST. You can
email us at support@seizmik.com.
Trailering Info:
ONLY trailer with rear window open and top fully and properly secured.
MAX SPEED – 55 MPH
Part# 18049
54-SW-90603
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Seizmik 18049
Summary of Contents for Seizmik 18049
- Page 1 • Each Seizmik product has a “difficulty-to-install” rating based on the following: •Easy – uses basic hand tools and does not require any modifications to the existing structure of your vehicle. Most Seizmik products fall into this category. Hey, why be difficult? •Skilled –...
- Page 2 RTV 500 Soft Top Installation (continued) Lay the soft top over the roll cage of the vehicle making sure the straps are on the outside of the ROPS. Locate the velcro straps running down the length of the rear vertical ROPS bar. Fasten around the bar. Repeat this step for the opposite side.
- Page 3 How to get Help - If you have any questions, comments, need assistance, or are missing parts, please call 1-866-838-3366 ext.110 between 9:00AM and 5:00PM EST. You can email us at support@seizmik.com, visit www.seizmik.com to download installation guides and product info, or contact your powersports dealer where you purchased your Seizmik product if you need additional assistance.
Need help?
Do you have a question about the 18049 and is the answer not in the manual?
Questions and answers