Seizmik 05007 Installation Manual

Polaris general dump bed rack

Polaris General Dump Bed Rack

Seizmik makes Windshields, Doors, Tops, Hood Racks, Mirrors, Light bars and other great accessories for utility

vehicles & side x sides. Our products are engineered tough for long life and tested under the harshest of conditions.

Always observe the warnings and precautions in this manual when using your Seizmik products. For best results,

carefully follow the instructions in this manual and make no modifications.

Seizmik products are designed, developed and manufactured by Vialink Corp. If you have any questions,

comments, need assistance, or are missing parts, please call 1-866-838-3366 between 9:00AM and 5:00PM EST.

You can email us at

service@seizmik.com

Part Number

#05007

Table of Contents

Need help?

Do you have a question about the 05007 and is the answer not in the manual?

Page 1 & side x sides. Our products are engineered tough for long life and tested under the harshest of conditions. Always observe the warnings and precautions in this manual when using your Seizmik products. For best results, carefully follow the instructions in this manual and make no modifications.
Page 2 Parts List Parts: Hardware: Left Side Basket (1) (1) M6 30mm Button Head Bolt Right Side Basket (1) (1) M6 35mm Button Head Bolt Quarter Clamp (4) (2) M6 Lock Nuts Star Bolt (4) (4) M8 35mm Hex Head Bolts Support Rods (2) (6) M8 60mm Socket Head Bolts Driver’s Side Basket Support (1)
Page 3 3. Attach the wedge nuts to the two basket side supports 4. Place the three pieces from step 3 into the holes on the and center basket support using (6) M8x60mm bolts. top edge of the bed rack. Tighten just enough to hold the wedge nuts on. 5.