WL-500W Wireless Router User Manual
1) Select Connect to an existing wireless
LAN (Station) radio button and click
Next to continue.
3) Set the authentication and encryption of
your WLAN card the same with those at
WL-500W. In the previous steps the Key
Length is 64 bits, Passphrase is 11111
Click Next to continue.
5) Setup the IP address of the WLAN Card
according to your network condition.
After the setup is complete, click Finish
to exit the One Touch Wizard.
2) One Touch Wizard searches and displays
the available APs in the Available
Networks list. Select WL-500W and
press Next to continue.
4) It takes several seconds for the wireless
card to associate with WL-500W. Press
Next to setup TCP/IP for your WLAN Card.