Summary of Contents for HIKVISION Villa Door Station
Page 1
Video Intercom Villa Door Station User Manual...
Page 2
● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
Page 3
Video Intercom Villa Door Station User Manual PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ● RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS;...
Page 4
Video Intercom Villa Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
Page 5
Video Intercom Villa Door Station User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety regulations, ● fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption ●...
Page 6
Video Intercom Villa Door Station User Manual Improper use or replacement of the battery may result in hazard of explosion. Replace with the ● same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
Page 7
Video Intercom Villa Door Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 8
Video Intercom Villa Door Station User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
Page 9
Video Intercom Villa Door Station User Manual rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Video Intercom Villa Door Station User Manual Contents Chapter 1 About this Manual ...................... 1 Chapter 2 Appearance ........................ 2 Chapter 3 Terminal and Wiring Description ................. 9 3.1 Terminal Description ......................9 3.2 Wiring Description ....................... 10 3.2.1 Door Lock Wiring ......................10 3.2.2 Door Contact Wiring ....................
Page 11
Video Intercom Villa Door Station User Manual 6.6.1 Local Parameters Settings ................... 30 6.6.2 System Settings ......................31 6.6.3 Network Settings ......................33 6.6.4 Video & Audio Settings ....................39 6.6.5 Image Settings ......................42 6.6.6 Event Settings ......................45 6.6.7 Schedule Settings ......................
Page 12
Video Intercom Villa Door Station User Manual 7.5.3 Search Video Intercom Information ................67 7.5.4 Upload Armed Information ..................69 Chapter 8 Video Intercom Operation ..................70 8.1 Call Resident ........................70 8.2 Unlock Door ......................... 70...
Video Intercom Villa Door Station User Manual Chapter 1 About this Manual Get the manual and related software from or the official website (http://www.hikvision.com). Product Model Wireless Description Villa Door Station DS-KV8113-WME1(C) 2.4 G Wi-Fi + 13.56 MHz DS-KV8213-WME1(C) 2.4 G Wi-Fi + 13.56 MHz DS-KV8413-WME1(C) 2.4 G Wi-Fi + 13.56 MHz...
Video Intercom Villa Door Station User Manual Chapter 2 Appearance...
Page 15
Video Intercom Villa Door Station User Manual Single-Button Villa Door Station Figure 2-1 Single-Button Villa Door Station Appearance...
Page 16
Video Intercom Villa Door Station User Manual Table 2-1 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals...
Page 17
Video Intercom Villa Door Station User Manual Two-Button Villa Door Station Figure 2-2 Two-Button Villa Door Station Appearance...
Page 18
Video Intercom Villa Door Station User Manual Table 2-2 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals...
Page 19
Video Intercom Villa Door Station User Manual Four-Button Villa Door Station Figure 2-3 Four-Button Villa Door Station Appearance...
Page 20
Video Intercom Villa Door Station User Manual Table 2-3 Description Description Microphone Indicator Unlock (Green)/ Call (Orange)/ Communicate (White) Camera Loudspeaker Button Card Reading Area IR Light TF Card Slot (Reserved) & Debugging Port Terminals...
Video Intercom Villa Door Station User Manual Chapter 3 Terminal and Wiring Description 3.1 Terminal Description Figure 3-1 Terminal Description Table 3-1 Description of Terminal and Interfaces Name Interface Description DOOR Door Lock Relay Output 2 (NC) COM2 Common Interface...
Video Intercom Villa Door Station User Manual Name Interface Description Note Before accessing to the Exit Button, select Input as Exit Button in I/O Settings page first. RS-485 485+ RS-485 Communication Interface 485- Power Input 12 VDC 12 VDC Input...
Video Intercom Villa Door Station User Manual 3.2.2 Door Contact Wiring Figure 3-3 Door Contact Wiring Note If the door contact is not used, the corresponding input interface needs to be grounded. Otherwise the door light will stay open.
Video Intercom Villa Door Station User Manual Chapter 4 Installation Note Make sure the device in the package is in good condition and all the assembly parts are included. ● Make sure your power supply matches your door station. ●...
Video Intercom Villa Door Station User Manual 4.2 Surface Mounting with Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. ● Purchase the protective shield before installation. ● Steps 1. Stick the mounting template on the wall. Drill screw holes according to the mounting template.
Page 28
Video Intercom Villa Door Station User Manual Figure 4-2 Mounting Template 2. Align the protective shield with mounting template. 3. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes. 4. Secure the device on the mounting plate with 4 supplied set screws.
Video Intercom Villa Door Station User Manual Figure 4-3 Surface Mounting with Protective Shield 4.3 Surface Mounting without Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. Steps 1. Stick the mounting template on the wall. Drill screw holes according to the mounting template.
Page 30
Video Intercom Villa Door Station User Manual Figure 4-4 Mounting Template 2. Secure the mounting plate on the wall with 4 supplied screws according to the screw holes. 3. Secure the device on the mounting plate with 4 supplied set screws.
Video Intercom Villa Door Station User Manual Figure 4-5 Surface Mounting without Protective Shield 4.4 Flush Mounting with Protective Shield Before You Start Tools that you need to prepare for installation: Drill (ø2.846) and gradienter. ● Purchase the protective shield before installation.
Page 32
Video Intercom Villa Door Station User Manual Figure 4-6 Mounting Template Note The suggested size of hole is 175 mm × 84 mm × 19 mm. 2. Install the gang box into the hole with 4 screws.
Video Intercom Villa Door Station User Manual 3. Align the protective shield with the gang box. 4. Insert the device to the gang box. Secure the device with 4 supplied screws. 5. Fix the cover onto the device with the screw.
Page 34
Video Intercom Villa Door Station User Manual Figure 4-8 Mounting Template Note The suggested size of hole is 175 mm × 84 mm × 19 mm. 2. Secure the gang box into the hole with 4 screws.
Page 35
Video Intercom Villa Door Station User Manual 3. Insert the device to the gang box. Secure the device with 4 supplied screws. 4. Fix the cover onto the device with the screw. Figure 4-9 Flush Mounting without Protective Shield...
Video Intercom Villa Door Station User Manual Chapter 5 Activation 5.1 Activate Device via Web You are required to activate the device first by setting a strong password for it before you can use the device. Default parameters of the door station are as follows: Default IP Address: 192.0.0.65.
Video Intercom Villa Door Station User Manual Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
Video Intercom Villa Door Station User Manual Chapter 6 Remote Configuration via Web 6.1 Login Web Browser You can log into the Web browser for device configuration. Steps 1. Enter the device IP address in the address bar of the web browser and press Enter to enter the login page.
Page 39
Video Intercom Villa Door Station User Manual Figure 6-1 Live View Function Descriptions: Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds.
Video Intercom Villa Door Station User Manual 6.4 User Management You can add, delete or search the information of the user. Click User to enter the settings page. Figure 6-2 User Management Click Add to add users. Enter the Employee ID, Name, Floor No. and Room No., Set the Start ●...
Video Intercom Villa Door Station User Manual Figure 6-3 Device Management Add Device Click Add to add the indoor station or sub door station. Enter the parameters and click OK to ● add. Click Import. Enter the information of the device in the template to import devices in batch.
Video Intercom Villa Door Station User Manual 6.6.1 Local Parameters Settings You can configure the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture by using the web browser. You can also set and view the saving paths of the captured pictures and recorded videos on the PC that running the web browser.
Video Intercom Villa Door Station User Manual Record File Parameters Record File Size Select the packed size of the manually recorded and downloaded video files to 256M, 512M or 1G. After the selection, the maximum record file size is the value you selected.
Page 44
Video Intercom Villa Door Station User Manual About Click System Settings → About and click Open Source Software Licenses to view the details. Maintenance Click Maintenance → Upgrade & Maintenance to enter the settings page. Figure 6-5 Maintenance Reboot: Click Reboot to reboot the device.
Video Intercom Villa Door Station User Manual Security Service Click Security → Security Service to enter the settings page. On the page, you can enable SSH according to your actual needs. Click Save to enable the settings. User Management Click User Management to enter the settings page.
Page 46
Video Intercom Villa Door Station User Manual Figure 6-6 TCP/IP Settings 2. Configure the network parameters. - Check DHCP, the device will get the parameters automatically. - Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually. 3. Configure the corresponding DNS server parameters.
Page 47
Video Intercom Villa Door Station User Manual Figure 6-7 Port Settings 2. Set the ports of the device. HTTP Port The default port number is 80, and it can be changed to any port No. which is not occupied. HTTPS Port The default port number is 443, and it can be changed to any port No.
Page 48
Video Intercom Villa Door Station User Manual Figure 6-8 Wi-Fi Settings 2. Select a Wi-Fi and click to pop-up the dialog box. 3. Enter the password of the wireless network to connect. 4. Optional: Click Network Settings to set the parameters of WLAN.
Page 49
Video Intercom Villa Door Station User Manual Figure 6-9 SIP Settings 2. Check Enable VOIP Gateway. 3. Configure the SIP parameters. 4. Click Save to enable the settings. FTP Settings Steps 1. Click Network → Advanced → FTP to enter the settings page.
Page 50
Video Intercom Villa Door Station User Manual Figure 6-10 FTP Settings...
Video Intercom Villa Door Station User Manual 2. Check Enable FTP. 3. Select Server Type. 4. Input the Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login.
Page 52
Video Intercom Villa Door Station User Manual Figure 6-11 Video Parameters 2. Select the Stream Type. 3. Configure the video parameters. Stream Type Select the stream type to main stream or sub stream. Video Type Select the stream type to video stream, or video & audio composite stream. The audio signal will be recorded only when the Video Type is Video &...
Page 53
Video Intercom Villa Door Station User Manual Set the frame rate. The frame rate is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout.
Video Intercom Villa Door Station User Manual Note Available range of volume: 0 to 10. 4. Click Save to save the settings. 6.6.5 Image Settings Display Settings Configure the image adjustment, backlight settings and other parameters in display settings. Steps 1.
Page 55
Video Intercom Villa Door Station User Manual Saturation Saturation describes the colorfulness of the image color, which ranges from 1 to 100. Sharpness Sharpness describes the edge contrast of the image, which ranges from 1 to 100. 4. Set the Day/Night Mode.
Page 56
Video Intercom Villa Door Station User Manual Figure 6-15 Backlight 1) Check the checkbox to enable BLC. 2) Select BLC Area. 6. Click Save to enable the settings. OSD Settings You can customize the camera name, time/date format, display mode, and OSD size displayed on the live view.
Video Intercom Villa Door Station User Manual 5. Select Cropping Resolution. 6. Click Save. Note You can select Cropping Resolution as 704*576, 1280*720, or 1920*1080. ● You can zoom in or zoom out the image by selecting Cropping Resolution after clicking Save.
Page 58
Video Intercom Villa Door Station User Manual Figure 6-16 Motion Detection 2. Slide Enable Motion Detection to enable the function. 3. Click Draw Area. Click and drag the mouse on the live video to draw a motion detection area. Click Save to save the settings.
Page 59
Video Intercom Villa Door Station User Manual 5. Click on the time bar and drag the mouse to select the time period. Click Save to save the settings. Delete Schedule Click Delete to delete the current arming schedule. 6. Click Linkage Method to enable the linkages.
Page 60
Video Intercom Villa Door Station User Manual Figure 6-17 Event Linkage 2. Select the Major Type as Device Event or Door Event. 3. Select the type of the Normal Linkage for the event. 4. Click Save to enable the settings.
Video Intercom Villa Door Station User Manual 6.6.7 Schedule Settings You can create call schedule, or else the device will call indoor station all day by default. Steps 1. Click Schedule → Video Intercom → Call Schedule . 2. Click the next row below Enable Indoor Station All Day by Default.
Video Intercom Villa Door Station User Manual Figure 6-19 Holiday Schedule 2) Click Add. 3) Set Start Time and End Time. 4) Select Call Type. 5) Drag mouse to set the schedule according to the actual needs. 6) Click OK.
Page 63
Video Intercom Villa Door Station User Manual Figure 6-20 Device No. Settings 2. Select the device type from the drop-down list, and set the corresponding information. 3. Click Save to enable the device number configuration. Note For main door station (D series or V series), the serial No. is 0.
Page 64
Video Intercom Villa Door Station User Manual Time Parameters Go to Intercom → Time Parameters to enter the page. Configure Max. Call Duration, Max. Message Duration, Max. Ring Duration, and click Save. Note Max. call duration between the module indoor station and client ranges from 90 s to 120 s. The ●...
Page 65
Video Intercom Villa Door Station User Manual I/O Settings Steps 1. Click Intercom → I/O Settings to enter the I/O input and output settings page. 2. Select I/O input No., input mode, output No., and output mode. 3. Click Save to enable the settings.
Video Intercom Villa Door Station User Manual 6.6.9 Access Control Settings Door Parameters Set the parameters of the door which is linked to the device. Steps 1. Click Access Control → Door Parameters to enter the settings page. Figure 6-23 Door Parameters 2.
Page 67
Video Intercom Villa Door Station User Manual Elevator Control Before You Start Make sure your door station is in the mode of main door station. Only the main door station ● support elevator control function. Make sure your door station has been connected to the elevator controller via RS-485 wire if you ●...
Page 68
Video Intercom Villa Door Station User Manual 2. Check to enable elevator control function. 3. Select an Elevator No., and select an elevator controller type for the elevator. 4. Set the Negative Floor. 5. Select the Interface Type as RS-485 or Network Interface. And enable the elevator control.
Video Intercom Villa Door Station User Manual Chapter 7 Configuration via Client Software 7.1 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on. After running the iVMS-4200, video intercom devices should be added to the client software for remote configuration and management.
Page 70
Video Intercom Villa Door Station User Manual Figure 7-1 Add to the Client...
Video Intercom Villa Door Station User Manual 7.1.2 Add Device by IP Address Steps 1. Click +Add to pop up the adding devices dialog box. 2. Select IP/Domain as Adding Mode. 3. Enter corresponding information. 4. Click Add. 7.1.3 Add Device by IP Segment You can add many devices at once whose IP addresses are among the IP segment.
Video Intercom Villa Door Station User Manual Note Up to 10 levels of organizations can be created. 7.3.2 Modify and Delete Organization You can select the added organization and click to modify its name. You can select an organization, and click X button to delete it.
Video Intercom Villa Door Station User Manual Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera.
Video Intercom Villa Door Station User Manual Steps 1. Select the person in the list and click Change Organization. 2. Select the organization to move the person to. 3. Click OK to save the settings. 7.4.4 Import and Export Person Information The person information can be imported and exported in batch.
Video Intercom Villa Door Station User Manual Note The person information, including person details, person's fingerprint information (if ● configured), and the linked card (if configured), will be imported to the selected organization. If the person name stored in the device is empty, the person name will be filled with the ●...
Page 76
Video Intercom Villa Door Station User Manual Figure 7-2 Issue Card in Batch 2. Click Settings.
Video Intercom Villa Door Station User Manual Figure 7-3 Card Settings 3. Select Card Type and Card No. Type. 4. Click OK to save the settings. Result After issuing the card to the person, the person and card information will display in the Person(s) with Card Issued list.
Video Intercom Villa Door Station User Manual Note For the user with access control module permissions, the user can enter the Access Control module and manage video intercom and search information. You should add the device to the software and configure the person to link the device in Access Control module before your configuration remotely.
Video Intercom Villa Door Station User Manual Steps 1. On the video intercom settings page, click Notice to enter the page. 2. Click +Add to pop up the adding dialog box. 3. Select the person according to your needs. 4. Edit the Subject, Type and Information.
Page 80
Video Intercom Villa Door Station User Manual Figure 7-4 Search Call Logs 2. Set the search conditions, including call status, device type, start time and end time. Call Status Click ˅ to unfold the drop-down list and select the call status as Dialed, Received or Missed.
Video Intercom Villa Door Station User Manual Search Notice Steps 1. On the Video Intercom page, click Notice to enter the page. 2. Set the search conditions, including notice type, start time and end time. Type Select Advertising Information, Property Information, Alarm Information or Notice Information as Type according to your needs.
Video Intercom Villa Door Station User Manual Chapter 8 Video Intercom Operation 8.1 Call Resident You can press the call button of the door station to call resident. Note Make sure you have added contacts to the device. ● Make sure you have configured the room No. for the call button. For more details. please refer ●...
Need help?
Do you have a question about the Villa Door Station and is the answer not in the manual?
Questions and answers