Page 2
January 2, 2018 Attn: Purchaser’s of the Newstripe, AeroVent 1X, 3X or Standard Aerosol Can Recycling units Respirator Required Decal Dear Customer: We thank you for your purchase of the AeroVent aerosol can recycling unit and apologize for the inconvenience that may be caused concerning the RESPIRATOR REQUIRED decal on the unit.
AeroVent® 3X TABLE OF CONTENTS Thank you and congratulations on Precautionary Warning ..... Page 1 your purchase of the AeroVent® 3X aerosol can disposal system. Assembly ........Page 2 The AeroVent® 3X has been Assembly Drawing ....Page 3 designed to puncture and drain aerosol cans that have been used and Parts List........
® AeroVent ALWAYS wear appropriate personal protective equipment when operating the unit! Always consult your facility safety manager for specified safety protocols prior to operating this equipment. Please read and understand all operation instructions as detailed in this manual.
® AeroVent ALWAYS wear appropriate personal protective equipment when operating the unit! ASSEMBLY DRAWING 2” Screws Flange Bolts PARTS LIST ITEM DESCRIPTION PART ITEM DESCRIPTION PART NUMBER NUMBER NUMBER NUMBER Safe2Vent™ replacement 10004703 Trough 10004339 element (Package of 2) Safe2Vent™ Dual Filter w/ 10004722 Bellows (3 required) 10003791...
® AeroVent ALWAYS wear appropriate personal protective equipment when operating the unit! OPERATION ® 1. Lift the operating handle to release the clamp, and open the AeroVent 3X lid. 2. Ensure that the front panel is in place in front of the trough liners. 3.
® AeroVent ALWAYS wear appropriate personal protective equipment when operating the unit! MAINTENANCE ITEM CHECK ACTION Lid Gasket 10004249 Before each use Replace As Necessary Safe2Vent ™ Element (2 pack) 10004703 Monthly Replace Every 90 days or 600 cans, more often for full cans Cobalt Point (3) 10003377 Before each use...
® AeroVent ALWAYS wear appropriate personal protective equipment when operating the unit! SAFE2VENT™ REPLACEMENT 1. Remove the filter cap with Viz-a-Ball™ from the filter element. 2. Lift off the filter element from the filter base. 3. Press the new element onto the filter base. 4.
18 (Eighteen) months from the date of purchase. In no event shall Newstripe, Inc. be liable for incidental or consequential damages and no person has any authority to bind it to any representation or warranty, responsibility for work done, materials furnished or repairs made by others without Newstripe’s specific written authorization.
Need help?
Do you have a question about the AeroVent 1X and is the answer not in the manual?
Questions and answers