Newstripe AeroVent 1X Product Manual

Aerosol can disposal system
Hide thumbs Also See for AeroVent 1X:

Advertisement

Quick Links

Product Manual
®
AeroVent
1X
Aerosol Can Disposal System
10004700
4700.0424

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AeroVent 1X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Newstripe AeroVent 1X

  • Page 1 Product Manual ® AeroVent Aerosol Can Disposal System 10004700 4700.0424...
  • Page 2: Table Of Contents

    AeroVent 1X Aerosol Can Disposal System TABLE OF CONTENTS Precautionary Warnings ...... Page 1 Thank you for purchasing the AeroVent 1X Aerosol Can Disposal System. Assembly ..........Page 2 Assembly Drawing & Parts List ..... Page 3 The AeroVent 1X has been designed to puncture and drain aerosol cans that have Operation ..........
  • Page 3: Precautionary Warnings

    ® AeroVent 1X Aerosol Can Disposal System Always consult your facility safety manager for particular safety protocols prior to operating this equipment. This unit is not intended for use with spray adhesives or expanding foam sealant products. PRECAUTIONARY WARNINGS • PLEASE read and understand all operation instructions as detailed in this manual.
  • Page 4: Assembly

    2. Remove the 2” bung plug from an empty 30 or 55 gallon recovery drum. Insert the threaded nipple of the AeroVent 1X into the opening and turn the unit until it is hand tight. The rear support foot should be located just inside the rim (chime) of the drum.
  • Page 5: Assembly Drawing & Parts List

    ® AeroVent 1X Aerosol Can Disposal System ASSEMBLY DRAWING PARTS LIST Part Part Item Description Item Description Number Number Safe2Vent Filter Assembly 10004701 Trough Spring 10004257 Safe2Vent Filter (1 Pack) 10004702 Support Foot (2 required) 10004262 Safe2Vent Filter (2 Pack) 10004703 Trough Liner w/can stop 10003970...
  • Page 6: Operation

    1. Using the can guide on the side of the unit, select the matching plunger (2”, 2.5” or 3”) 2. Lift the operating handle to release the clamp, and then open the AeroVent 1X lid. 3. The can stop should be in the slots at the front of the trough liner.
  • Page 7: Maintenance

    ® AeroVent 1X Aerosol Can Disposal System MAINTENANCE ITEM CHECK REPLACE/SERVICE Lubricate the surface with grease regularly Lid Gasket Before each use to keep the lid from sticking. Replace as needed Change every 60 days or 600 cans, or more Safe2Vent Filter Monthly often for full cans.
  • Page 8: Warranty

    Return Materials Authorization (RMA) from Newstripe and then ship the defective part or parts of the equipment, transportation prepaid by the purchaser, to Newstripe together with a written description of any claimed defect and proof of purchase date of the materials being returned.

This manual is also suitable for:

10004700

Table of Contents