® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! TABLE OF CONTENTS Precautionary Warning ..... Page 1 Thank you and congratulations on your purchase of the AeroVent® Assembly ........Page 2 Standard aerosol can disposal system. Operation ........
® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! Always consult your facility safety manager for particular safety protocols prior to operating this equipment. This unit is not intended for use with spray adhesives or expanding foam sealant products. PRECAUTIONARY WARNING! ...
® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! Operating Handle Box should include these parts Lid Handle Plunger Mounting Hardware Set #7 AeroVent Safe2Filter ® with Ground Cable Operating Handle Safe2Filter 5/16-18 x 3/4” Bolt (4) ...
® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! OPERATION 1) Using the can guide on the side of the unit, select the matching plunger (2”, 2.5” or 3”) 2) Lift the operating handle to release the clamp, and then open the AeroVent® lid. 3) The can stop should be in the slots at the front of the trough liner.
® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! MAINTENANCE ITEM CHECK *REPLACE Lid Gasket 10004249 Before each use Lubricate the surface regularly with grease to keep the lid from sticking. Safe2Filter 10004898 (2 pack) Monthly Change every 60 days or 600 cans, or more often for full cans.
® AeroVent Standard ALWAYS wear appropriate personal protective equipment when operating the unit! COBALT POINT REPLACEMENT HELPFUL HINT: Leave the unit mounted on the drum to replace cobalt points. 1. Open the lid and then remove the left and right shrouds. 2.
18 (Eighteen) months from the date of purchase. In no event shall Newstripe, Inc. be liable for incidental or consequential damages and no person had any authority to bind it to any representation or warranty, not be responsible for work done, materials furnished or repairs made by others without its' specific written authorization.
Need help?
Do you have a question about the AeroVent Standard and is the answer not in the manual?
Questions and answers