Connecting A Tv Using A Component Video Cable (Better) - Insignia NS-BRDVD3-CA User Manual

Blu-Ray Disc Player
Connecting a TV using a component video
cable (better)
Notes
• The following task shows connecting the audio
to a receiver. If you want to use the TV speakers
instead of a receiver, connect the audio cable to
the TV's audio in jacks on the TV.
• High definition video (up to 1080i) is supported
with a component video cable.
Using a digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
Back of player
TV
2 Connect a digital optical cable from the
OPTICAL DIGITAL OUT jack on the back of your
player to the OPTICAL DIGITAL IN jack on the
receiver.
Or
Connect a digital coaxial cable from the
COAXIAL DIGITAL OUT jack on the back of your
player to the COAXIAL DIGITAL IN jack on the
receiver.
Digital audio receiver
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Component video cable
www.insigniaproducts.com
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
TV
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
Analog audio receiver
Audio cable
Back of player
Component video cable
5