Connecting A Tv Using A Component Video Cable (Better) - Insignia NS-WBRDVD User Manual

Connected Blu-Ray Disc Player
Connecting a TV using a component video
cable (better)
Notes
The following task shows connecting the audio to a
receiver. If you want to use the TV speakers instead of
a receiver, connect the audio cable to the TV's audio
in jacks on the TV.
Using an digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
Back of player
TV
2 Connect a digital optical cable to the OPTICAL
DIGITAL OUT jack on the back of your TV and to
the OPTICAL DIGITAL IN jack on the receiver.
Or
Connect a digital coaxial cable to the COAXIAL
DIGITAL OUT jack on the back of your TV and to
the COAXIAL DIGITAL IN jack on the receiver.
3 Connect a second optical or digital cable to the
DIGITAL OUT jack on the receiver and to the
DIGITAL IN jack on the TV.
Digital audio receiver
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Component video cable
www.insigniaproducts.com
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
TV
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
3 Connect a second audio cable to the AUDIO
OUT L/R jacks on the recevier and to the AUDIO
IN L/R jacks on the TV.
Analog audio receiver
Audio cable
Back of player
Component video cable
5