Table of Contents
Advertisement
Blu-Ray Disc Player
Specifications
Specifications are subject to change without notice.
System and outputs
Media
TV signal system
Video output
Component video (Y, CB,CR)
Audio output (analog)
Audio output (digital)
Audio performance (frequency
response)
HDMI output
General
Power
Power consumption
Dimensions
L × W × H
Weight
Operating temperature
Operating humidity
Video file requirement (USB/DISC)
Video file compatibility with your player is limited
as follows:
• Maximum resolution size: 1920x1080 (W x H)
pixels
• File extensions: .wmv
• Playable Audio format: Dolby Digital , DTS , MP3 ,
WMA , AAC , AC3
• Sampling frequency: within 32 to 48kHz (WMA),
within 16-48kHz (Mp3)
• Bit rate: within 20-320kbps (WMA), within
32-320kbps (Mp3)
• CD-R/RW, DVD R/RW, BD-R/RE Format: ISO
9660+JOLIET, UDF and UDF Bridge format
• Maximum Files/Folder: Less than 2000. The movie
file name and subtitle are limited to 180
characters.
• Not all of the WMA and AAC Audio formats are
compatible with your player.
BD-ROM, BD-JAVA 1.1, DVD-Video,
DVD+RW/+R, DVD-RW/-R, CD-RW/-R
NTSC
Electric level output: 1.0 Vp-p
Resistance: 75S
Output connector: Pin jack (1 system)
Y output level: 1.0 Vp-p Resistance: 75
PB output level: 0.7 Vp-p Resistance: 75
PR output level: 0.7 Vp-p Resistance: 75
Output connector: Pin jack (Y: green,
PB: blue, PR: red)(1 set)
Output format: 480i, 480p, 720p, 1080i
Output level: 2 Vrms (1 kHz, 0 dB)
Output connector: Pin jack
Number of connectors: 2-channel (1)
Optical digital output (1)
Coaxial digital output (pin jack) (1)
DVD (linear audio):
• 4 Hz to 22 kHz (48 kHz sampling)
• 4 Hz to 44 kHz (96 kHz sampling)
CD-Audio: 4 Hz to 20 kHz
S/N ratio: 90 dB
Dynamic range: 80 dB
Total harmonic distortion: 0.004%
Output format: 480i, 480p, 720p,1080i,
1080p
Output Connector: Type A (19 pin)
110V-120V ~ 50/60Hz
25 W
16.93 × 10.0 × 1.89 inches
(430 × 254 × 48 mm)
7.5 lbs. (3.4 kg)
41°F to 95°F (5°C to 35°C)
10% to 75%
www.insigniaproducts.com
• HD WMA movie files contained on a USB 1.0/1.1
flash drive may not play correctly. Blu-ray, DVD, or
USB 2.0 are recommended to play back HD WMA
movie files.
• Your player does not support files that are
recorded with GMC (Global Motion
Compensation) or Qpel (Quarter pixel). Those are
video encoding techniques in MPEG4 standard,
like DivX or XVID.
MP3/WMA audio file requirement (USB/DISC)
• File extensions: .mp3, .wma
• Sampling frequency: Within 8 to 48kHz (WMA),
within 11 to 48kHz (Mp3)
• Bit rate: Within 8-320kbps (WMA, Mp3)
• CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
• Maximum Files/Folder: Less than 2000 (total
number of files and folders)
• Depending on the size and number of the
MP3/WMA files, it may take several minutes to
read the contents of the media.
• The total playback time indicated on the screen
may not be correct for VBR files.
Photo file requirement (USB/DISC)
• File extensions: .jpg , .jpeg , .png
• Recommended size:
• Less than 4,000 x 3,000 x 24 bit/pixel
• Less than 3,000 x 3,000 x 32 bit/pixel
• CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF, and UDF Bridge format
• Maximum Files/Folder: Less than 2000 (total
number of files and folders)
• Progressive and lossless compression photo
image files are not supported.
• Depending on the size and number of the photo
files, it may take several minutes to read the
contents of the media.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced technician for help.
21
Hide quick links:
Advertisement
Table of Contents
