Lectrosonics Venue Block 944 Installation Manual page 17

5. When the driver installation is complete, the final
page of the Wizard appears. Click "Finish" to close
the Found New Hardware Wizard.
USB Driver Installation (Windows XP) -
Subsequent Installations
The Windows XP operating system regards all Lec-
Net2 devices as separate USB devices because each
™
has a unique serial number. Windows XP will want to
install the USB driver every time it encounters a Lec-
Net2 device whose serial number it does not recog-
™
nize. The process is simplified if the LecNet2
driver has already been installed at least once on the
computer system. Use the following procedure if the
LecNet2 USB driver was previously installed on the
™
computer system.
1. On the first page of the Wizard, select Install the
software automatically Recommended) then click
"Next >".
2. Windows will discover the previously installed
driver. If a dialog box opens warning you that the
driver has not passed Windows Logo Testing, click
"Continue Anyway."
Rio Rancho, NM, USA
Digital Hybrid Wireless™ Modular Receiver System
3. When the driver installation is complete, the final
page of the Wizard appears. Click "Finish" to close
the Found New Hardware Wizard.
USB
™
17