Dreamline ENIGMA-X SHDR-61606210 Series Installation Instructions Manual

Shower and tub door

Hide thumbs Also See for ENIGMA-X SHDR-61606210 Series:

Installation instructions manual (33 pages)

NSTALLATION

ARE YOU A PROFESSIONAL INSTALLER?

Did you know that DreamLine offers a free certification course for professional installers?

DreamLine's Installer Certification Program can increase your visibility in the marketplace with a

preferred listing on our website to grow your business. Training classes are held at our company

headquarters in Warminster PA. Professional installers are encouraged to send an email to:

ICP@DreamLine.com for complete details on how to apply to become a DreamLine Certified Installer.

• Aqua Lux

ICP promo supplement Ver 1w 072019

ERTIFICATION

ROFESSIONAL

• Unidoor

• Enigma-X

• This cover page contains information for professional

installers only

• The installation manual begins on the next page

NSTALLERS

• Prism

ROGRAM

• Infinity-Z

Table of Contents

Need help?

Do you have a question about the ENIGMA-X SHDR-61606210 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Dreamline ENIGMA-X SHDR-61606210 Series

Page 1 Training classes are held at our company headquarters in Warminster PA. Professional installers are encouraged to send an email to: ICP@DreamLine.com for complete details on how to apply to become a DreamLine Certified Installer. • Aqua Lux •...
Page 2 ® purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details. Do Not Return Product to the Store. Contact DreamLine with any questions.
Page 3 For best results, squeegee the glass after each use and dry with a soft cloth. Record the following purchase information for your records or in the event you need to contact DreamLine ® Purchase Order...
Page 4: Symbol Legend
Table of Contents Section Title Page # ClearMax® Coating Information — Warnings and General Preparation Manual Selection - Single Threshold and Enclosure Return Panel Manual Important Model Information Recommended Reinforcement Information Model Specific Preparation Tools Detailed Diagram 'A' of Shower Door Components & Parts List A 8-10 Detailed Diagram 'B' of Shower Door Components &...
Page 5 This product should be installed by someone familiar with the construction requirements 3 business days of the delivery date. Please note that DreamLine® will not replace any for this type of project and the care necessary for the safe installation and operation of damaged products or missing parts free of charge after 3 business days or if the the product.
Page 6: Manual Selection
Right-hand door installation shown For more information about DreamLine ® Shower Doors, Tub Doors & Enclosures, please visit DreamLine.com ENIGMA-X / ENIGMA-XO Shower Enclosure Return Panel manual Ver 1 01/2018 ©2018 DreamLine. All Rights Reserved For more information about DreamLine ®...
Page 7 Roller Wheel Assembly safety set INSTALLATION. screws: must be accessible and must THE LATEST VERSION OF THE INSTALLATION be retightened with Thread Lock MANUAL IS AVAILABLE TO VIEW OR PRINT ON during installation. DREAMLINE.COM ENIGMA-X Shower and Tub Door Manual Ver 7 062019...
Page 8 Recommended Reinforcement Information Install studs OR install 2”x 6” wood blocking between the studs where the Guide Rail Brackets will attach to the wall measure from threshold* (see list below) *Blocking height requirement (to center) as measured from the threshold or tub deck: Enigma Air / Sky = 73”...
Page 9 Model Specific Preparation 2-3/4” minimum threshold REQUIRED: No Out-of-Plumb 2-3/4” Adjustment; Verify minimum threshold and walls ±0.0 ±0.0 threshold with a level Threshold must be level ±0.0 ±0.0 Threshold must be level ” 2 ” Tile Acrylic Contact the manufacturer of the base, tub or threshold material with any questions regarding Drilling into a stud or 2×6 wood the drilling of holes into their product.
Page 10 Diagram(s) on pages 8 and 11; and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of NOTE the box. If any parts are damaged or missing, please contact DreamLine for replacement. ®...
Page 11 Detailed Diagram ‘A’of Shower Door Components Panel Glass Door Glass The glass surface with the ClearMax™ label must be installed to face inside of the shower for Model # SHDR-61487610-## SHDR-61607610-## *Right-hand door installation shown. SHDR-61606210-## © 2019 DreamLine All Rights Reserved ®...
Page 12: Parts List A
Parts List A *All drawings in this manual are for illustrative purposes only and are not drawn to scale. ENIGMA-X Shower and Tub Door Manual Ver 7 062019...
Page 13 Parts List A Dam Strip End Cap ENIGMA-X Shower and Tub Door Manual Ver 7 062019...
Page 14 ONLY Small Inline Inline Panel Glass Door Glass Panel Glass The glass surface with the ClearMax™ label must be installed to face inside of the shower for Model # SHDR-61727610-## *Right-hand door installation shown. ©2019 DreamLine All Rights Reserved ®...
Page 15: Parts List B
Parts List B 72” MODEL ONLY Vertical Vinyl Seal Top Guide Rail (for 72”) *All drawings in this manual are for illustrative purposes only and are not drawn to scale. ENIGMA-X Shower and Tub Door Manual Ver 7 062019...
Page 16 ±0.0 Middle ________” ±0.0 ±0.0 Bottom 2-3/4” minimum ________” threshold Threshold must be level Fig 1 2-3/4” minimum Tools Needed The minimum threshold requirement for the NOTE ENIGMA-X is 2-3/4” of flat threshold space. ©2019 DreamLine ® All Rights Reserved...
Page 17 Cut the Top Guide Rail (#03) from the door end only, which is the end that is farther from the Glass-to-Rail Bracket (#07) holes. DO NOT cut from the panel end of the Top Guide Rail (#03). ©2019 DreamLine All Rights Reserved...
Page 18 Glass-to-Rail Bracket disks with the high spot of the felt tip pen to make adjustment easier to see. bushing pointed towards the door end of the guide rail. ©2019 DreamLine All Rights Reserved ®...
Page 19 Loosen the screw on the rear of the NOTE Glass-to-Rail Bracket (#21) with the supplied allen wrench and secure it to the Top Guide Rail (#24). It is NOT neccessary to fully dissassemble the bracket during installation. Parts Needed Fig 4 ©2019 DreamLine All Rights Reserved ®...
Page 20 Door end of guide rail High spot of Adjustment Disk bushing Fig 5 The Panel Glass (#02) must be installed to NOTE Tools Needed the outside of the Top Guide Rail (#03). ©2019 DreamLine All Rights Reserved ®...
Page 21 Parts Needed x1set Fig 6 For single threshold installation (shown), this bracket will be installed into the wall. NOTE For an enclosure installation only, this bracket will need to be installed into the threshold. ©2019 DreamLine All Rights Reserved ®...
Page 23 ONLY overhead view of threshold & guide block *72” Model Only inside inside 90° Inline Panel glass Tools Needed Guide Block (#12) must be installed Fig 9 square to the plane of the glass. ©2019 DreamLine ® All Rights Reserved...
Page 25 ◾If a stud is present behind the wall: Tools Needed drill a Ø3/16”(4mm) hole up to the stud. ◾If no stud is present behind the wall: drill a Ø5/16”(10mm) hole and install the Wall Anchor (#09b). ©2019 DreamLine All Rights Reserved ®...
Page 26 DO NOT attempt to lift the Door Glass with the handle as this may result in damage to the glass and/or serious personal injury. Use a professional grade glass suction cup and an assistant. ©2019 DreamLine All Rights Reserved ®...
Page 27 Countersunk Screw (#17). M5×10 NOTE ◾For installation into a Tile Threshold: drill a Ø3/16”(4mm) hole up to the stud and use the ST4.2 x 40mm Countersunk Screw (#17). Part #12 - Guide Block (with caps) ©2019 DreamLine ® All Rights Reserved...
Page 28 ◾For installation into a Tile Threshold: any questions regarding the drilling drill a Ø3/16”(4mm) hole up to the stud of holes into their product. and use the ST4.2 x 40mm Countersunk Screw (#17). ©2019 DreamLine ® All Rights Reserved...
Page 29 For Enclosure Model: Refer to Step 8 in the Enigma-X/Enigma-XO Enclosure Return Panel Manual Lower guide rail Raise guide rail to connect the shower assembly to the Return Panel using the Glass-to-Guide Rail Connector (#28). Glass-to-Rail Bracket Adjustments x1set ©2019 DreamLine ® All Rights Reserved...
Page 30 48” or 60” Model Size: Cut the Dam Strip (#15) to the size of: (X) + 3/8”. NOTE 72” Model Size: Cut the Dam Strip (#15) to the size of: (L) + 3/4”. ©2018 DreamLine®. All Rights Reserved ©2019 DreamLine All Rights Reserved...
Page 31 (for 48” & 60” model) Parts Needed Fig 16 Tools Needed For the 72” Model: Insert the Dam Strip (#15) into the NOTE Small Inline Panel Glass Bottom Bracket (#22). (Fig 16.4*) ©2019 DreamLine All Rights Reserved ®...
Page 32 Tools Needed Attach the Guide Block face plate Secure the Dam Strip (#15) to the threshold NOTE to the installed Guide Block (#12). with several pieces of painter’s tape until the silicone fully cures. ©2019 DreamLine All Rights Reserved ®...
Page 33 ONLY Parts Needed Fig 19 Guide Block (#12) face plate Fig 20 Tools Needed Secure the Dam Strip (#15) to the NOTE threshold with several pieces of painter’s tape until the silicone fully cures. ©2019 DreamLine All Rights Reserved ®...
Page 34 Door Glass (#05) to create a seal with the wall. The Safety Set Screw on both Roller Assembly Wheels MUST be re-tightened after installation to prevent the wheel bolt from becoming loose. Apply Thread Lock Adhesive (#26) during installation. See detailed description on page 34. ©2019 DreamLine ® All Rights Reserved...
Page 35 Roller Assembly Adjustment Procedure for: Enigma, Enigma-X, Enigma-XO To create a good seal with the wall and to achieve minimal clearance beneath the door glass without making contact with the bottom guide block or threshold. Have at least two 3/16” shims or wedge shims (to maintain space beneath the door glass) and an assistant available to help with this procedure.
Page 36 Roller Guard Position the Roller Guard (#29) 1/16” below the rail. Hold the roller guard 1/16” bolt with the Allen Wrench (#11) and tighten the interior post using a outside small allen wrench (Fig 22.2*) ©2019 DreamLine All Rights Reserved ®...
Page 37 Use a razor knife to trim the Vertical Vinyl Seal (#14) at the top to avoid interfering with the Roller Guards (#29) and at the bottom where the door meets the SafeStop™ Bumper (#30). (Fig 23) ©2019 DreamLine All Rights Reserved ®...
Page 38 5. Tighten screw into the stopper hole (inline panel side only) with the glass when the door 6. Correctly position the door side stopper, use Thread Lock Adhesive (#26) is in the closed position. and tighten the set screw. (Fig 24.5) ©2019 DreamLine All Rights Reserved ®...
Page 39 Install the SafeStop™ Bumper (#30) SafeStop™ Bumper (#30). Wipe the area using the 3M™ tape. with an alcohol swab before installation. Screwing the SafeStop™ Bumper to the wall is optional (see step 26*). ©2019 DreamLine ® All Rights Reserved...
Page 40 Drill the correct hole diameter (see Note above). Remove the 3M™ Tape and NOTE Tools Needed position the SafeStop™ Bumper (#30) onto the threshold against the Wall Bracket (#19) and attach using the ST4.2 x 40 Countersunk Screw (#17). (Fig 26) ©2019 DreamLine All Rights Reserved ®...
Page 41 Allow 24 hours for the silicone cloth over the Enigma Top Guide Rail as to cure before using the this may cause the Roller Assembly wheels shower. Tools Needed to get stuck and possibly cause serious damage or injury. ©2019 DreamLine All Rights Reserved ®...
Page 42: Product Maintenance
To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, NOTE and/or damage. Contact DreamLine with any questions or concerns. ® Enigma-X Maintenance Checklist ◻...
Page 43: Troubleshooting
•Always protect the glass once removed from the box by padding the top and bottom of the glass with cardboard, styrofoam or other soft material until ready to install. Prior to contacting DreamLine® Customer Service, please have the following information readily available: - Purchase Order Information - Name, PO Number, Dealer/Vendor Name, etc.
Page 44 1 or 8 = Polished SS 4 or 5 or 7 = Brushed SS 6 = Oil Rubbed Bronze 9 = Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information Complete Warranty information is available on DreamLine.com ©2019 DreamLine All Rights Reserved...
Page 45 1 or 8 = Polished SS 4 or 5 or 7 = Brushed SS 6 = Oil Rubbed Bronze 9 = Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information Complete Warranty information is available on DreamLine.com ©2019 DreamLine All Rights Reserved...
Page 46 1 or 8 = Polished SS 4 or 5 or 7 = Brushed SS 6 = Oil Rubbed Bronze 9 = Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information Complete Warranty information is available on DreamLine.com ©2019 DreamLine All Rights Reserved...
Page 47 010113003 Small In-line Panel Glass Warranty information is 07121045 / 07125045 / 07126045 Top Guide Rail (for 72”) available on DreamLine.com. 091107 ST4.2x40 Countersunk Screw BOLD digit indicates finish color: 1 or 8 = Polished SS 4 or 5 or 7 = Brushed SS 6 = Oil Rubbed Bronze 9 = Satin Black ©2019 DreamLine...

This manual is also suitable for:

Enigma-x shdr-61487610 series Enigma-x shdr-61607610 series Enigma-x shdr-61727610 series Enigma-x shdr-61606210-07 Enigma-x shdr-61487610-07 Enigma-x shdr-61607610-07 ... Show all

Dreamline ENIGMA-X SHDR-61606210 Series Installation Instructions Manual

Table of Contents

Need help?

Questions and answers

Related Manuals for Dreamline ENIGMA-X SHDR-61606210 Series

Summary of Contents for Dreamline ENIGMA-X SHDR-61606210 Series

Page 4: Symbol Legend

Page 6: Manual Selection

Page 12: Parts List A

Page 15: Parts List B

Page 42: Product Maintenance

Page 43: Troubleshooting

This manual is also suitable for:

Table of Contents