Download Print this page

Dreamline ENCORE-X SHDR-166062X Series Installation Instructions Manual

Shower and tub door

Advertisement

Quick Links

S
HOWER AND
PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION
MODEL #
SHDR-166062X-##
##=finish
01 - Chrome
04 - Brushed Nickel
06 - Oil Rubbed Bronze
09 - Satin Black
IMPORTANT!
DreamLine
reserves the right to alter, modify or redesign products at any time without prior notice for the
®
purpose of product improvement and customer experience. Please refer to the model's web page on
DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional
product details.
Do Not Return Product to the Store. Contact DreamLine® with any questions
ENCORE-X Shower and Tub Door Manual Ver 1 032020
ENCORE-X
T
D
I
UB
OOR
1-866-731-2244
NSTALLATION
MODEL #s
SHDR-164876X-##
SHDR-165476X-##
SHDR-166076X-##
©2020 DreamLine® All Rights Reserved
I
NSTRUCTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENCORE-X SHDR-166062X Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dreamline ENCORE-X SHDR-166062X Series

  • Page 1 ® purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details. Do Not Return Product to the Store. Contact DreamLine® with any questions...
  • Page 2 For best results, squeegee the glass after each use and dry with a soft cloth. Record the following purchase information for your records or in the event you need to contact DreamLine ® Purchase Order...
  • Page 3: Symbol Legend

    Table of Contents Section Title Page # ® ClearMax Coating Information — Warnings and General Preparations Model Specific Preparations Tools Detailed Diagram of Shower and Tub Door Components Parts List Installation Steps 8-21 Towel Bar Handle Installation Product Maintenance Troubleshooting Roller Assembly Adjustment Procedure Factory Parts Information 25-28...
  • Page 4 • • DreamLine® reserves the right to alter, modify or redesign products any time without After opening all boxes and packages, read this introduction carefully. Check that all the prior notice for product improvement and customer experience. Please refer to the items are included in the package by marking off the components on the “Detailed...
  • Page 5 Model Specific Preparation REQUIRED: Verify the threshold and walls with a level Accommodates up to 3/8” (9.5mm) of Out-of-Plumb Adjustment within ±0.0 ±0.0 the Wall Profiles Threshold must be level ±0.0 ±0.0 2-1/4” (57.1mm) minimum 2-1/4” threshold (57.1mm) Leave corner protectors on the minimum glass until it is...
  • Page 6 Diagram on page 5; and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any NOTE parts are damaged or missing, please contact DreamLine for replacement. The shipping ®...
  • Page 7 Detailed Diagram of Shower and Tub Door Components ©2020 DreamLine® All Rights Reserved...
  • Page 8: Parts List

    Parts List ENCORE-X Shower and Tub Door Manual Ver 1 032020...
  • Page 9 Parts List ENCORE-X Shower and Tub Door Manual Ver 1 032020...
  • Page 10 Installation Steps W: Top *at model height ________” ±0.0 ±0.0 ±0.0 ±0.0 W: Bottom ________” Fig 1 Tools Needed *ENCORE-X Model Height: NOTE ENCORE-X Tub door: 62-1/4” (1578.93mm) ENCORE-X Shower door: 77-1/4” (1961.27mm) ©2020 DreamLine® All Rights Reserved...
  • Page 11 - 1/16” Fig 2a Fig 2b Parts Needed Use a metal file to deburr the cut end Fig 2c Tools Needed NOTE The Top Guide Rail (#02) fits wall-to-wall and can be cut from either end. ©2020 DreamLine® All Rights Reserved...
  • Page 12 The Bottom Guide Rail (#15) will be shorter than the top guide rail because it fits between the Wall Profiles (#01); To keep the Guide Block NOTE (#05) holes centered, it is necessary to cut the Bottom Guide Rail (#15) equally from both ends. ©2020 DreamLine® All Rights Reserved...
  • Page 13 Tools Needed Secure the Bottom Guide Rail (#15) to the threshold with several strips of painter’s tape to hold it tight in position until the silicone cures. ©2020 DreamLine® All Rights Reserved...
  • Page 14 Fig 5 Parts Needed Tools Needed ©2020 DreamLine® All Rights Reserved...
  • Page 15 Ø5/16”(8mm) hole and insert the Wall Anchors (#09) and use the ST5 x 70mm Countersunk Screws (#13) for the Guide Rail Bracket (#07) and the ST4.0 x 40mm Pan Head Screws (#10) for the SafeClose™ Bumpers (#04) Wall Profile (#01). ©2020 DreamLine® All Rights Reserved...
  • Page 16 Parts Needed Fig 7 Tools Needed Repeat Steps 6-7 to the install the opposite Wall Profile (#01) before proceeding onto the next step. ©2020 DreamLine® All Rights Reserved...
  • Page 17 Set aside for later installation in Steps 11-12. 06.5 Fig 8b Fig 8c Side view of Slide the Roller Assemblies (#06) Roller Assemblies (#06) into the Top Guide Rail (#02). inserted into the Top Guide Rail (#02). ©2020 DreamLine® All Rights Reserved...
  • Page 18 Top Guide Rail during this step. Fig 9a Tools Needed Make sure the Top Guide Rail (#02) sits firmly onto the Guide Rail Brackets (#07) and is level across the opening. ©2020 DreamLine® All Rights Reserved...
  • Page 19 Secure the Top Guide Rail (#02) to the Guide Rail Brackets (#07) with the ST4.2×20 Truss Head Screws (#12) on both sides. Parts Needed Tools Needed ©2020 DreamLine® All Rights Reserved...
  • Page 20 Bottom Guide Rail (#15) when positioning the inside Door Glass (#03) into the appropriate groove of the Guide Block (#05); remove the shims once the Roller Assemblies are secured to the door glass. (recommended) ©2020 DreamLine® All Rights Reserved...
  • Page 21 Once the outside Door Glass (#03) has been positioned onto the shims and into the appropriate groove in the Guide Block (#05), it will be necessary to move the installed inside door glass aside to safely attach the outside door glass to both Roller Assemblies (#06). (recommended) ©2020 DreamLine® All Rights Reserved...
  • Page 22 Towel Bar Handle Installation inside outside Fig 13 Parts Needed All towel bar gaskets and sleeves must be installed the to prevent glass-to-metal contact NOTE ©2020 DreamLine® All Rights Reserved...
  • Page 23 The surfaces need to be clean and free of debris before applying silicone NOTE Hours Fig 13 Tools Needed Allow 24 hours for the silicone to cure before using shower ©2020 DreamLine® All Rights Reserved...
  • Page 24: Product Maintenance

    To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, NOTE and/or damage. Contact DreamLine with any questions or concerns. ® ENCORE-X Maintenance Checklist ◻...
  • Page 25: Troubleshooting

    Suggested Solution Page(s) ·Check all shipping/packaging material for missing parts/components. Missing Parts ·If not found, contact DreamLine® Customer Support [1-866-731-2244] to ―― order factory part replacement. ·If the Top Guide Rail (#02) or Bottom Guide Rail (#15) is cut too short Top or Bottom Guide Rail during installation, contact DreamLine®...
  • Page 26 Use the adjustment bolt on the Roller Assembly to adjust NOTE the Door Glass so it closes evenly into the Wall Profiles. Tools Needed Place 5/16” (8mm) shims beneath the glass to prevent glass-to-metal contact with the Bottom Guide Rail during this procedure. (recommended) ©2020 DreamLine® All Rights Reserved...
  • Page 27 1 pc BOLD digit indicates finish color: 1 - Chrome 4 - Brushed Nickel 6 - Oil Rubbed Bronze 9 - Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com.
  • Page 28 1 pc BOLD digit indicates finish color: 1 - Chrome 4 - Brushed Nickel 6 - Oil Rubbed Bronze 9 - Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com.
  • Page 29 1 pc BOLD digit indicates finish color: 1 - Chrome 4 - Brushed Nickel 6 - Oil Rubbed Bronze 9 - Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com.
  • Page 30 1 pc BOLD digit indicates finish color: 1 - Chrome 4 - Brushed Nickel 6 - Oil Rubbed Bronze 9 - Satin Black Contact Support@DreamLine.com for Part replacement, installation assistance or additional information. Complete Warranty information is available on DreamLine.com.
  • Page 31 NOTES ENCORE-X Shower and Tub Door Manual Ver 1 032020...
  • Page 32 TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine Shower Doors and Enclosures please visit DreamLine.com ® ©2020 DreamLine® All Rights Reserved...