Table of Contents
Advertisement
Quick Links
LABEL PRINTER
MODEL : LK-B230Ⅱ/B230IIR
4" LABEL PRINTER USER'S MANUAL
Aroot Co., Ltd.
28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do ,18103, Republic of Korea
TEL +82-31-8077-5000 / FAX +82-31-624-5310 / http://www.miniprinter.com
All specifications are subject to change without notice
B230Ⅱ/B230 Ⅱ R ENG Rev. 10/2023
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SEWOO LK-B230II
Summary of Contents for SEWOO LK-B230II
- Page 1 LABEL PRINTER MODEL : LK-B230Ⅱ/B230IIR 4” LABEL PRINTER USER’S MANUAL Aroot Co., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do ,18103, Republic of Korea TEL +82-31-8077-5000 / FAX +82-31-624-5310 / http://www.miniprinter.com All specifications are subject to change without notice B230Ⅱ/B230 Ⅱ R ENG Rev. 10/2023...
-
Page 2: Table Of Contents
Table of Contents Safety Precautions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. Unpacking 1) This device may not cause harmful interference, and 2. Inspecting The Printer including 2) T his device must accept any interference received, 3. -
Page 3: Safety Precautions
Safety Precautions For better safety and reliability, adhere to the following precautionary measures. WARNING Read and follow the instructions carefully before operation of the product. Failure to follow these instructions could result in fire, electric shock, other injuries, or property damage. Indication Do not disassemble, Prohibition... -
Page 4: Unpacking
1. Unpacking 2. Inspecting The Printer Standard Printer Head Notch Sensor Printer Power Cord Power Supply Moving Paper Sensor Paper width Guide Paper Spindle Ribbon Core Ribbon Head Release Lever Ribbon Spindle (2EA) Label Manual Optional Power Switch Interface Connectors Power Connector Auto Cutter Peeler... -
Page 5: Attaching Power Supply
3. Attaching Power Supply CAUTION Make sure to be careful of the HOT head. 220VAC 115VAC Opening the printer Check the specification of the AC power Turn off the power of the printer and Open the upper cover by pushing the Place the paper roll as shown. -
Page 6: Interface Cable Connection
4. Interface Cable Connection 5. Loading the Paper Printer Turn off the printer and open the upper Rise up the paper upper guide by pulling cover by pushing the in the direction of the head release lever. the arrow. Paper Fixing Tap Open the paper width guide by Pull out one of the adjustable width pushing it to the right &... -
Page 7: Loading Ribbon
6. Loading Ribbon Ribbon Ribbon Spindle Remove the vinyl covering on the Insert one side of the ribbon spindle. Insert paper roll into the printer. Adjust the paper width guide to meet the ribbon. Depress the indicated button paper width. on the ribbon spindle while inserting the ribbon roll. -
Page 8: Setting Up The Sensor
7. Setting Up The Sensors Set Black Mark Sensor right to the size Locate notch sensor on the same number Insert one side of the ribbon spindle. Push the other side of the ribbon spindle of roll paper. point- as the black mark sensor is down to secure it. -
Page 9: Self Test
8. Self-Test Printing / Configuration Printout 8-1. Self-Test printing when printer power is off 8-2. Self-Test printing when printer power is on 1 While pressing the “FEED” button, power on the printer and then release the “FEED” 1 Press the “FEED” button until after the sound of two beeps. Then release the “FEED” button at the start of printing. - Page 10 9. Media Calibration 9-1. Media Calibration when printer power is off 9-2. Media Calibration when printer power is on close Press the “FEED” button and release immediately after the first beep. With power off mode, insert the paper While pressing “PAUSE ” button, power roll and close the printer cover.
-
Page 11: Cutter Cleaning (Option)
10. Offline Printer Reset Function 11. Cutter Cleaning (option) - The LK-B230 can be reset without being connected to a computer. 1 With the printer powered on, pressing the “FEED” button will produce a beep Lift the cutter diagonally and separate it from the printer. sound every 1 second. -
Page 12: Peripherals Connection (Option)
12. Peripherals Connection (option) This product can communicate with other devices via Wi-Fi & Bluetooth communication and cable. Pull out 2 screws on the back of the Clean the fixed blade and cutting edge cutter with a screwdriver and demount by wiping a cotton bud with a cleansing the plate. -
Page 13: Interface
13. Interface Interface Connectors 9Pin Serial Interface Signal Description Standard Input Printer receive data line RS-232C level Output Printer transmit data line RS-232C level 6, 8 Output Printer handshake to host line RS-232C level System Ground Input Data Send Ready 1, 7, 9 USB Interface 9 Pin Serial... -
Page 14: Media Roll Size
14. Media Roll Size 15. Labels <-- a --> Media width (inch, liner) Maximum 116.0 mm (4.57 inches) Minimum 38.1 mm (1.5 inches) <-- b --> Label length Minimum 10 mm (0.39 inches) <-- c --> Label gap height Maximum 10 mm (0.39 inches) Core... -
Page 15: Tags And Strip With Slots
16. Tags and Strip with Slots 17. Tags and Strip with Black Marks <-- a --> Media width (inch, liner) <-- a --> Tag or strip width Maximum 116.0 mm (4.57 inches) Maximum 116.0 mm (4.57 inches) Minimum 38.1 mm (1.5 inches) Minimum 38.1 mm... -
Page 16: Plain Continuous Stock
18. Plain Continuous Stock 19. Specifications The printer can use continuous stock without any detection slots or black marks. Print method Thermal Transfer and Direct Thermal The printer must be set for continuous stock by the Q command. Print speed (Max.) 102mm/sec The length of each copy is decided by the size of the print image and any additional Print width (Max.) -
Page 17: Command List
20. Command List ZPL Command List Code39, Code128 with subsets A/B/C/Auto, UCC/EAN-128, Code93, Codabar, Interleaved 2 Command Description of 5, UPC-A, UPC-E, UPC-A and E with 2 or 5 Scalable/Bitmapped Font digit extension, EAN-8, EAN-13, EAN-8 and 13 Barcode Code 11 BarCode with 2 or 5 digit extensions, Postnet, Plessey, MSI-3, German Post CodeLogmars, Code11, Interleaved 2 of 5 BarCode... - Page 18 Command Description Command Description Download Graphics Media Tracking Field Block Media Type Field Clock(for Real-Time Clock) Printing Mirror Image of Label Field Data Print Orientation Field Hexadecimal Indicator Print Quantity Field Number Print Rate Print Width Field Origin Set Serial Communications Field Parameter Set Darkness Field Reverse Print...
-
Page 19: Utilities 21. S/W
We provides SDK, Driver, etc. as follows to respond to various S/W usage environments. Name Description You can download this S/W from the homepage. SEWOO Label Printer Configuration Tool. Name Description This program provides the following functions. This is an install program used to print a label printer - Set Ethernet and RS232 in Windows OS.
Need help?
Do you have a question about the LK-B230II and is the answer not in the manual?
Questions and answers