OpenEye OE-C1016T2-S Quick Start Manual

Hide thumbs Also See for OE-C1016T2-S:

Download this manual

OE-C1016T2-S Quick Start Guide

OE-C1016T2-S Quick Start Guide Hard Copy

Click the link if you need to download the original hardcopy of the

OE-C1016T2-S Quick Start Guide

included with the

boxed contents.

Box Contents

OpenEye C1016T2-S cameras come with self-tapping screws and plastic anchors, mounting template, a waterproof

cable connector, and a torx tool. Identify the following components to make sure everything has been properly included

with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.

OE-C1016T2-S Turret Camera

Self-Tapping Screws and Plastic Anchors

Waterproof Cable Connector

Need help?

Do you have a question about the OE-C1016T2-S and is the answer not in the manual?

Page 1 Box Contents OpenEye C1016T2-S cameras come with self-tapping screws and plastic anchors, mounting template, a waterproof cable connector, and a torx tool. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.
Page 2 Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected. NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power source when providing the camera with 12vDC power.
Page 3 Assigning an IP Address OpenEye IP cameras are set to DHCP by default. If a DHCP server is not detected after 2 minutes, the camera will default to IP address 192.168.51.2. If you are not using a DHCP server, NCM will allow you to batch configure a static IP address.
Page 4 12vDC / PoE Pan: 0° ~ 360° Pan / Tilt / Rotate Tilt: 0° ~ 80° Rotate: 0° ~ 360° IP Rating IP67 Related Links Network Camera Manager Advanced Camera Management Adding Cameras and Camera Settings OE-C1016T2-S Copyright © OpenEye 2023...