On/O Switch And Mute Button; Clip Charging; Powering The Charging Dock; Charging The Clip Mic - Catchbox Plus User Manual

5.3 On/o switch and mute button

Open the Clip lever to turn the power switch on or o .
Press the mute button to control the microphone: if the symbol is red, the Clip is muted; if the
symbol is white, the mic is unmuted.
While on the charging dock, the Clip is automatically muted.
The mic turns on and unmutes automatically when picked up from the charging dock, allowing
for immediate use.

5.4 Clip charging

5.4.1 Powering the Charging Dock

The Clip mic should be charged on its dedicated charger -
the Charging Dock.
1.
Take the provided USB-C cable and plug it into the port located at the
bottom of the Charging Dock.
2.
Arrange the cable within the designated grooves to keep it organized
and ensure it does not hang loosely or cause any obstruction.
3.
Connect the other end of the cable to a power outlet.
4.
When the Charging Dock is powered, the LED light on the top part of
the Dock will light up.

5.4.2. Charging the Clip mic

1.
Place the Clip mic on the Charging Dock. Magnetic pins will help
ensure the Clip is positioned.
2.
If all LED lights on the front of the Clip are on, the mic is fully charged.
3.
If one of the lights is blinking, the Clip mic is not yet fully charged and
is currently charging. A full charge takes 2 hours and the battery life
on a full charge is up to 8 hours.
4.
The Clip mic is automatically muted while charging.
13