Charging The Battery - Motorola 120T User Manual

Digital wireless telephone
Hide thumbs Also See for 120T:
Table of Contents

Advertisement

Do This
2 If necessary, slide
down the battery
door release latch
and lift the door off
of the phone.
3 Insert the battery,
printed arrows
first, into the top of
the battery
compartment and
push down.
4 Replace the battery door.

Charging the Battery

New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery, as indicated by the following instructions.
Release
latch
19
Some batteries perform best after several full charge/
discharge cycles.
Do This
1 Plug the
travel
charger into
Release
your phone
tab
with the
release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is
fully charged (
release tab and remove the travel charger.
Notes:
• When you charge the battery, the battery level
indicator in the upper right corner of the display
shows how much of the charging process is
complete.
• If the battery charge drops too low, your phone
may power off during a call, even when the charger is
connected. To avoid this possibility, do not make calls
while charging the battery.
20
), press the

Advertisement

Table of Contents
loading

Table of Contents