Installation Instructions; Verify The Package Contents; Remove The Oven Door(S) - Dacor EOR Installation Instructions Manual

Verify the Package Contents

Verify that all the components below have been provided. If any item is missing or damaged, please contact your dealer
immediately. Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure
proper installation before proceeding.
• Use and care manual
• Mounting screws (Wood, #6 X ¾, Dacor PN 83331, 4 for
single ovens, 6 for double ovens)
• Standard oven racks (single ovens come with 2, double
ovens come with either 4 or 5)
• GlideRack™ oven rack (1)
• Broil grill and pan

Remove the oven door(s)

Remove the door(s) to reduce weight and make the
oven easier to lift:
• Do not attempt to disengage the hinge catches with
the door removed from the oven. The hinge springs
could release, causing personal injury.
• Do not lift or carry oven door by the door handle.
• On double ovens, remove the bottom door first to
reduce the chance of damage.
8

Installation Instructions

WARNING
Catch
Step 2
• Exhaust grill with 2 mounting screws (2, #8 X 3/8", color
should match exhaust grill: Silver Dacor PN 83571,
Black Dacor PN 83263)
• Light Lens Pry Stick
• Dacor Stainless Steel Cleaner (stainless steel models
only)
• Meat probe
Removing the Oven Door(s): All Models
Except EORS136
See facing page for removing door from model
EORS136.
1. Open the door to its fully opened position.
2. Rotate the catch over the retaining arm on
3. Lift the oven door to about a 30˚ angle from the horizon-
tal.
4. Pull the door away from the oven while continuing to lift.
Gripping
point
both hinges.
Grab both sides of the
door and pull out at a 30°
angle to remove.
Gripping
point
Steps 3 and 4
30º