Installation instructions
Preparing to install the oven
WARNING
Excessive Weight Hazard
To avoid personal injury and property damage, use two or more people to move the oven.
1. Decide the oven's final location. Avoid drilling/cutting household wiring/plumbing.
2. To avoid floor damage, set the oven on a cardboard sheet. (Do not lift by the door
handle or any part of the front frame.)
3. Reduce the oven's weight to ease installation:
a. Remove packing material and tape from the oven.
b. Remove racks and other accessories from the oven chamber.
c. Remove the oven door(s) (see below).
4. Keep any packing material (e.g., corner posts) that may aid the installation.
5. Remove the hardware from the literature pack.
6. Slide the oven (with cardboard beneath) to its installation site.
Removing and replacing the oven door(s)
Removing the oven door(s) before lifting the oven into its cutout will make lifting easier
and will lessen the risk of damaging the door(s) or injuring personnel.
• Remove the door(s) with both hands.
• Before removing a door, arrange a blanket (or the corner posts from the packing
material) on a flat, stable surface on which you will lay the door(s).
Disconnecting the LED wire harness
Find the harness, and disconnect it before removing the door.
Single
Double
Wire Harness
5
English 1