This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 87/308 EEC of 02/06/87 (Radio Interference
Suppression Directive) and subsequent
modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Grid preparation
Left door opening:
Remove the left side (A) of the grid cutting it from the
rear (see figure).
DO002/2
Right door opening:
Remove the right side (B) of the grid cutting it from
the rear (see figure).
DO001
To position the grid on the appliance proceed as
follows:
Apply the grid to the base of the appliance by pushing
on to the clasps (a) until they click.
A
B
a
a
Door reversal
To reverse the opening direction of the door, proceed
as shown in the figures:
1
2
1
6
7
2
23
4
5
3
8