Electrical Connection; Appliance Description; View Of Appliance; Prior To Initial Start-Up - JUNO JKI 4054 Operating Instructions Manual

Electrical connection

Before initial start-up, refer to the appliance serial
plate to ascertain if supply voltage and current values
correspond with those of the mains at the installation
location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for
the electrical supply. The supply must have a fuse rat-
ing of at least 10 Amps.

Appliance Description

View of Appliance

(various models)


Temperature regulator and

interior lighting

Butter and cheese compartment with lid

Variable door storage compartment

Door storage compartment
Bottle compartment
Prior to Initial Start–Up
1. Please clean the appliance interior and all acces-
sories prior to initial start-up (see section: "Clean-
ing and Maintenance").
If the socket is not accessible once the appliance is
built in, the electrical installation must include suitable
means of isolating the appliance from the mains (e.g.
fuse, cut-out, current trip or similar with a minimum
contact separation of 3 mm).
Attention: The mains connection cable may only be
replaced by a skilled electrician. Please contact your
dealer or our customer service department for
repairs.


Fruit and vegetable trays

Shelves
General purpose box (not on all models)
Bottle / Can holder (not on all models)
Rating plate
23