Page 1
OWNER’S TECHNICAL MANUAL HR90045BSS EL Series Stainless Steel Spring Rewind Hose Reel Description Reinforced stainless steel frame provides maximum strength & stability Working pressure of up to 2320psi (160bar) 25m x 12" ID rubber hose capacity 1.5mm thick robust drum with stiffening ribs & flange edges...
OWNER’S TECHNICAL MANUAL HR90045BSS EL Series Air & Water Spring Rewind Hose Reel Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose in use. Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage.
OWNER’S TECHNICAL MANUAL HR90045BSS EL Series Air & Water Spring Rewind Hose Reel Operation 1. Check reel for correct operation by slowly pulling out the hose. A “clicking” noise will be heard every half revolution of the drum. 2. To latch the reel, pull out the hose and allow it to retract after hearing the first second or third “click”.
Need help?
Do you have a question about the EL Series and is the answer not in the manual?
Questions and answers