Page 1
MS200 and MS202 Monorail Scale Installation Manual August 5, 2024 PN 16984 Rev C...
Page 2
All information contained within this publication is, to the best of our knowledge, complete and accurate at the time of publication. Rice Lake Weighing Systems reserves the right to make changes to the technology, features, specifications and design of the equipment without notice.
Page 3
August 5, 2024 Established revision history; Added newly released scales Table i. Revision Letter History Technical training seminars are available through Rice Lake Weighing Systems. Course descriptions and dates can be viewed at www.ricelake.com/training or obtained by calling 715-234-9171 and asking for the training department.
5.0 Specifications ............... . . 18 Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost.
MS200 Portable Monorail Scales The MS200 Monorail Scale is for portable use and is designed to bolt onto a straight section of either 3/8'' x 2 1/2'' or 1/2'' x 2 1/2'' rail. The overall length of straight rail required for the scale and ramps is 41''. The scale body requires a 22'' space between existing support hangers.
Do not operate or work on this equipment unless this manual has been read and all instructions are understood. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement manuals.
Installation Installation This section provides an overview of MS200 and MS202 Monorail Scale installation information. Pre-Installation Checks Before installing the portable monorail scale, check the trolleys used in the plant to ensure there is adequate clearance between the top of the swivel hook and the bottom of the scale (Figure 2-1).
Page 8
MS200 and MS202 Monorail Scale 4. Slide the scale unit over the rail with the load cell bracket toward the rail-hanger side of the rail then move the scale left or right along the rail to the desired location. NOTE: The installation kit provides two 1/16'' shims, 2-1/2'' x 20'' long for use with portable monorail scales on rails that are 3/8'' thick.
4. Select a convenient location for mounting the indicator tilt stand within the length of the load cell cable. NOTE: If the location requires a location further than the existing load cell cable, consult an authorized Rice Lake Weighing Systems scale technician.
MS200 and MS202 Monorail Scale Maintenance This section provides an overview of MS200 and MS202 Monorail Scale maintenance information. NOTE: Use live rail shims as necessary to reach proper live rail height. Portable Monorail Replacement Parts 3.1.1 MS200HB Portable 750 lb ENP Mild Steel Monorail Scale (PN 19743) 40.32 in...
MS200 and MS202 Monorail Scale 3.1.3 MS200HB Portable 1500 lb Stainless Steel Monorail Scale (PN 213007) 8.00 in 203.20 mm 5.19 in 131.72 mm 3.46 in 87.80 mm 40.32 in 1024.13 mm 4.91 in 124.76 mm Figure 3-3. MS200HB Portable 1500 lb Monorail (PN 213007) Replacement Parts Item No.
Authorized Reseller/OEM and accepted by Rice Lake. All systems and components are warranted against defects in materials and workmanship for one (1) year from the date of shipment from Rice Lake, unless otherwise stated in the product catalog or manual. Rice Lake warrants that the equipment sold here under will conform to the current written specifications authorized by Rice Lake.
Need help?
Do you have a question about the MS200 and is the answer not in the manual?
Questions and answers