Woodward UG-25+ Application Note
Oil level gage kit
Hide thumbs
Also See for UG-25+:
- Installation and operation manual (60 pages) ,
- Security manual (22 pages) ,
- Installation procedure supplement (5 pages)
Subscribe to Our Youtube Channel
Related Manuals for Woodward UG-25+
Summary of Contents for Woodward UG-25+
- Page 1 Application Note 51349 (Revision NEW) Original Instructions UG-25+ Oil Level Gage Kit Changing the Oil Sight Glass Window to a Vented Oil Level Gage...
-
Page 2: General Precautions
Revisions—Changes in this publication since the last revision are indicated by a black line alongside the text. Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is believed to be correct and reliable. However, no responsibility is assumed by Woodward unless otherwise expressly undertaken. -
Page 3: Warnings And Notices
Start-up On- and off-highway Mobile Applications: Unless Woodward's control functions as the supervisory control, customer should install a system totally independent of the prime mover control system that... -
Page 4: Electrostatic Discharge Awareness
Do not touch the components or conductors on a printed circuit board with your hands or with conductive devices. To prevent damage to electronic components caused by improper handling, read and observe the precautions in Woodward manual 82715 , Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, and Modules. - Page 5 Do not tighten the sight glass using the upper wrench flats as this could cause the glass to break. Instead, tighten by using the lower wrench flats. 8. Remove the oil bleed plug on top of the adapter. Woodward...
- Page 6 9. Add oil to the governor until oil comes to the top of the oil bleed plug hole in the adapter. 10. Install the oil bleed plug. 11. Add oil to the governor to the oil fill level on the sight glass. Figure 1. Governor with Previous Components Woodward...
- Page 7 Application Note 51349 UG-25+ Oil Level Gage Kit Figure 2. Governor with New Components Installed Woodward...
- Page 8 UG-25+ Oil Level Gage Kit Application Note 51349 Figure 3. Oil Level Gage Components Figure 4. Oil Level Gage Configurations Woodward...
- Page 9 2. Remove the bronze filter element and discard. 3. Leave the O-ring in place. 4. Install the aluminum insert. 5. Reinstall the cap. 6. Install the modified breather plug into the governor top cover. Figure 5. Breather Plug Woodward...
- Page 10 Email and Website—www.woodward.com Woodward has company-owned plants, subsidiaries, and branches, as well as authorized distributors and other authorized service and sales facilities throughout the world. Complete address / phone / fax / email information for all locations is available on our website.
Need help?
Do you have a question about the UG-25+ and is the answer not in the manual?
Questions and answers