Safety Prior to handling the machine, these instructions should be read and understood. If anything needs to be clarified, please contact your Busch representative. Read these instructions carefully before use and keep for future reference. These instructions remain valid as long as the customer does not change anything on the product.
In this instruction manual, the illustrations may differ from the appearance of the machine. NOTE Technical term. In this instruction manual, we consider that the term ‘machine’ refers to the ‘vacuum pump/ compressor’. 4 | 16 Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en...
0.76 A ACC 0500 2 x 500 W 2 x 0.76 A NOTE The name plate(s) of the fan(s) state(s) nominal voltages rather than voltage ranges for rea- sons of UL-certification! Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en 5 | 16...
● Make sure that the machine is placed or mounted horizontally on a flat surface. If the machine is installed outdoor: ● Provide a protective cover against the weathering effects. 6 | 16 Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en...
NOTE To prevent potential nuisance alarms, Busch recommends that the control system is config- ured with a time delay of at least 20 seconds. Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en...
Air discharge Other versions of MM machine are different from pipework. If anything of assembly remains to be clarified, contact your Busch representative and ask for drawings. For the machine MI …: ● The short side panel without fan(s) such that it will stand next to the motor of the machine...
Page 9
Electrical Connection | 4 Acoustic cabinets ACC 0320 are delivered ex-works with star-connection. The delta-connection requires a modification of the ex-works wiring by the customer. Acoustic cabinets ACC 0500 are delivered ex-works with star-connection. The delta-connection requires a modification of the ex-works wiring by the customer.
Page 10
● Put the remaining long side panel against the two short side panels and close the latches ● Put the lid on top of the side panels and close the latches. 10 | 16 Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en...
The acoustic cabinet is suitable for ambient temperatures from 0 to 40 °C. ● After shutting down the machine let the fan(s) run for approx. 5 to 10 minutes more (in order to avoid heat accumulation inside the acoustic cabinet) Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en 11 | 16...
EU Declaration of Conformity This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla- ration of Conformity is issued under the sole responsibility of the manufacturer.
UK Declaration of Conformity This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Dec- laration of Conformity is issued under the sole responsibility of the manufacturer.
Page 15
N otes Installation and Retrofit Instructions ACC 0320-0500 RI_EN_en 15 | 16...
Page 16
With a network of over 60 companies in more than 40 countries and agencies worldwide, Busch has a global presence. In every country, highly competent local personnel delivers custom-tailored support backed by a global network of expertise. Wherever you are.
Need help?
Do you have a question about the ACC 0320 and is the answer not in the manual?
Questions and answers