Download Print this page
SteelFlex CSP-900.4 Owner's Manual

SteelFlex CSP-900.4 Owner's Manual

Advertisement

Quick Links

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
CSP-900.4
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
perform jerky or uncoordinated movements that may cause injury.
own safety do not begin any exercise program without proper instruction.
OWNER'S MANUAL
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.
TM
Trademark of United States Fitness Produots Council

Advertisement

loading
Need help?

Need help?

Do you have a question about the CSP-900.4 and is the answer not in the manual?

Questions and answers

Summary of Contents for SteelFlex CSP-900.4

  • Page 1 5.Do not allow children or minors to play on or around this equipment. 6.If unsure of proper use of equipment, call your local distributor. 7.WARNING: Consult your physician before starting your exercise program. For your own safety do not begin any exercise program without proper instruction. CSP-900.4 OWNER'S MANUAL...
  • Page 2 CSP-900 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (A1)ROUND INNER HEX SCREW M8X40L PARTIAL QTY.2 (A2)HEX BOLT M8X60L PARTIAL QTY.4 (A3)HEX BOLT M10X60L PARTIAL QTY.4 (A4)BOLT CAP(9212-024) QTY.4 (A5)M10X25L SOCKER FLAT SCREW QTY.2 CSP900.4-102012 Page...
  • Page 3 CSP-900 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION (C4)3/8" ROUND END CAP WASHER QTY.4 (B1) M8 NYLON LOCK NUT QTY.2 (B2)M10 NYLON LOCK NUT QTY.4 (C5)M8 SPRING WASHER QTY.4 (C1)M8(I.D.)FLAT WASHER Ø18 QTY.4 (C6)M20 WASHER Ø30QTY.2 (C2)M8(I.D.)FLAT WASHER Ø24 QTY.4 (C3)M10(I.D.)FLAT WASHER Ø27 QTY.4 CSP900.4-102012 Page...
  • Page 4 CSP-900 ASSEMBLY INSTRUCTIONS HARDWARE ILLUSTRATION -------------------------------------------[2PCS] (D1)Ø50X10 END COVER(8130-131) -------------------------------------------------[2PCS] (D2)40X80 END CAP(9211-113) --------------------------------------[2PCS] (D3)Ø60X42H DECK BUFFER(9214-037) ----------------------------------[2PCS] (D4)40X80 ROUND END COVER(9261-070) ------------------------------------------------[1PCS] (D5)40X80 FOOT CAP(9261-071) ------------------------------------------------[1PCS] (D6)40X80 FOOT CAP(9261-072) -----------------------------------------[2PCS] (D7)95X140L RUBBER PAD(9630-003) -------------------------[2PCS] (D8)Ø16.1XØ8X22.5L STEEL BUSHING(8110-150) CSP900.4-062015 Page...
  • Page 5 CSP-900 ASSEMBLY INSTRUCTIONS PARTS ILLUSTRATION SHEET A1[1SET] B3[1SET] C[1PCS] 5584-K007 40X80X2tX600L D[1PCS] E1[1SET] F[2PCS] 5584-K008 8220-148 8386-101 40X80X2tX600L Ø20X74L G[1PCS] H[1PCS] I[1PCS] 8830-017 9121-064 9111-065 CSP900.4-102012 Page...
  • Page 6 CSP-900 ASSEMBLY INSTRUCTIONS Above shows STEP1 assembled and completed A4X2 B2X2 C4X2 A4X2 C3X2 B2X2 C3X2 A3X2 C4X2 A3X2 CSP900.4-102012 Page...
  • Page 7 CSP-900 ASSEMBLY INSTRUCTIONS Above shows STEP2 assembled and completed A2X2 C5X2 C2X2 C2X2 C5X2 A2X2 CSP900.4-062015 Page...